• End frames: 1" square x .093" (25x2.4mm) wall extruded aluminum tubing
• Tie Bars: left to right and front to back tie bars of 1" (25mm) diameter aluminum bar stock, drilled and tapped at each end.
• Slides, 3" & 5" (75 & 127mm) spacing:.060"x11/4"x11/2" (1.5x32x38mm) profile, bulb-tipped extruded angle-riveted to .060"x1"x1" (1.5x25x25mm) angle uprights
• Slides, 11/2" (38mm) spacing: .060"x1/2"x11/2" (1.5x12.7x38mm) bulb-tipped, extruded channel-riveted to .060"x1"x1" (1.5x25x25mm) angle uprights
• Casters: two HS5M on back - 5" (127mm) diameter ball bearing swivel stem casters with self-lubricating axle. Two HS5MB on front - same as above with wheel brake. NSF listed
• Shipped “knocked down” for reduced freight rate. Easily assembled with 12 bolts

Pass-Thru Design