• Ideal for severe environments (humidity, salts, pollutants, sulfur, etc.)
• Excellent protection, good conductivity enhancing, excellent lubrication
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• Provides NO Cleaning

DeoxIT® Shield S-Series provides long-lasting protection on metal surfaces in severe environments. It is NOT a cleaner, protects, lubricates and maintains optimum conductivity on all metal connectors and contacts.

Recommended pre-cleaning with DeoxIT® D-Series contact cleaner or other cleaning method for best protection. Use on NEW metal surfaces, usually in the manufacturing process. It is also ideal where high degrees of pollution (sulfur, salts, acids, etc.) are present.

For reference, DeoxIT® Shield has 0.0% cleaning action. Use on clean surfaces only.

Applicator: Container, provides NO flushing action, applies 5% DeoxIT® Shield.
Formulation: 5% DeoxIT® Shield, petroleum naphtha, 3M Novex 7100.
Use: When contact and connector are easily accessible. Provides flushing action.
Notes: Use when over spray is an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). Will not swell rubber.
Container: Transferring fluid into a non-approved container for storage or resale may compromise efficacy and voids warranty.
* Temperature Range, -34 C (-29 F) to +210 C (410 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Maunfacturer Disclaimer