EA E-00NS is a fast-setting, non-sagging, thixotropic, industrial-grade epoxy adhesive. Once mixed, the two-component epoxy cures at room temperature to form a translucent, rigid, machinable bondline. When fully cured, the epoxy is resistant to a wide range of chemicals and solvents and acts as an excellent electrical insulator. Typical applications include bonding plastic, metal, glass, wood, ceramic, rubber, and masonry materials. Its non-sagging formula is especially suited for use on vertical surfaces to avoid run-off, as well as staking fillet bonds and general industrial repairs. It is designed for use in component assembly, appliances, electronics, and fiber optics.

Features:

• Brand: Hysol®
• Series: E-00NS
• Product Type: Epoxy Adhesive
• Hardness: 80Shore D
• Material Compatibility: Plastic, Metal, Glass, Wood, Ceramic, Rubber, Masonary
• Color: Part A:Light Cream, Part B:Clear/Yellow
• Primary Color: Part A:Light Cream, Part B:Clear/Yellow
• Mix Ratio: 100:92
• Physical Form: Liquid
• Cure Time: 24h
• Viscosity Measurement: Part A:200000 to 700000, Part B:20000 to 70000mPa/s
• Chemical Composition: Part A:Polymercaptan Hardener, Benzyldimethylamine, Treated Fumed Silica, Monoethanolamine, Part B:Epoxy Resin, Treated Fumed Silica, Epoxy Resin
• Specific Gravity: Part A:1.12, Part B, 1.17
• VOCs Content: <10g/L
• Odor: Part A:Mercaptan/Sulfur, Part B:Faint/Epoxy
• Cure Type: Room 77°F
• Dielectric Strength: 16kV/mm
• Elongation at Break: 15%
• Gel Time: 2 to 6min
• Tensile Strength?: 1500psi
• Container Capacity: 400ml
• Container Type: Dual Cartridge
• Applications: Bonding, Component Assembly, Appliances, Electronics, Fiber Optics
• Package Quantity: 6CA