Techni-Tool
SKB Cases
SKB Cases

SKB Cases 3SKB-R904U24 4U, Roto Shock Rack, 24in Deep, 4" Casters, 16.5in x 36.25in x 26.5in, rSeries

Exterior height is measured without wheels installed. With wheels installed total height is 20.75"

Our Part #10068766

Condition:New

Mfr Part #3SKB-R904U24

SKB Cases 3SKB-R904U24
SKB Cases
SKB Cases

SKB Cases 3SKB-R904U24 4U, Roto Shock Rack, 24in Deep, 4" Casters, 16.5in x 36.25in x 26.5in, rSeries

Exterior height is measured without wheels installed. With wheels installed total height is 20.75"

Our Part #10068766

Condition:New

Mfr Part #3SKB-R904U24

CA Prop 65
$1,564.99EACH
Calif. Prop 65
  • Patented compound hinged doors
  • Threaded steel rails
  • Rear rails
  • Shock and water resistant
  • Gasketed doors
  • Pressure relief valve
  • Field replaceable latches
  • Removable 4.5" casters
  • Stacks securely with the wheels on or off
  • Recessed latches
  • Adjustable elastomer shock absorbers
  • Provisions to add additional shocks
  • Roto molded for strength

24" 3SKB Roto Shock Racks feature a standard depth of 24" from front to rear rail, with lid depths of 4.5" per lid. All 3SKB Series Roto Shock Racks feature a compound hinge system that allows the lid to swing out and completely around to lie flat against the main body of the case. This also enables effortless removal/reinstallation of the lid with a simple lift motion. Both front and rear lids are designed to protrude into the base of the case approximately 1" with a unique double wall structure that makes them incredibly rigid where this intersection occurs, providing MIL-SPEC sealing characteristics with significantly fewer latches than most competitive cases. This revolutionary design allows for rapid deployment in an up-right configuration, even when stacked -- 3SKB Roto Shock Racks are the only shock racks in the marketplace today that will open front and back while stacked. The inner rack chassis is built of high strength / lightweight aluminum alloy and 11 gauge hot rolled carbon steel rack rails to DIA-310 standards, creating an H-shaped frame that provides maximum strength. Shock and vibration mitigation is accomplished with eight (8) elastomeric isolators rated for a payload range of 40 - 150 pounds in a standard configuration, and up to 300 pounds in a special order extended payload configuration allowing adequate sway space for ambient air circulation and heat dissipation. The rack rails come pre threaded for standard 10-32 hardware and mounting screws are included. Other standard features include an automatic ambient pressure relief valve and removable 4" casters.
Exterior height is measured without wheels installed. With wheels installed total height is 20.75"

BrandSKB Cases
ColorBlack
SeriesrSeries Shock Rack
TypeRack
Outside Width26.5"
Outside Height16.5"
Outside Length36.25"
$1,564.99EACH