SAP1-kit Probe Kit

Features

• For SAP1000, SAP2500 probes

The SAP1000 and SAP2500 probes are provided with numerous features and accessories to make probing and connecting to different test points easier than ever. Descriptions of each accessory item are as follows:

Straight Tip - The straight tip is rugged and designed for general probing. Fits in either probe socket.

Pogo Tip - The pogo tip provides z axis compliance. The tip can fit into a socket or via and onto an IC leg.

L-In Adapter - These leads have a socket on one end with a right angle and a square pin on the other to connect to the input or ground socket of the probe body and is recommended in high frequency applications.

Z-Ground - The offset pin is designed to be attached to either socket of the probe head. The offset pin is the highest quality grounding solution and is recommended in high frequency applications.

Y Lead Adapter - This lead is used for both ground and input lead simultaneously. It has two sockets on one end and two square pins on the other and may be used for general purpose probing.

Straight Pin Leads - These leads have a socket on one end and a square pin on the other to connect to the input or ground socket of the probe body, and may be used for general purpose probing.

Right Angle Pin Leads - These leads have a socket on one end with a right angle and a square pin on the other to connect to the input or ground socket of the probe body, and may be used for general purpose probing.

Channel ID Clips - They are used to distinguish the oscilloscope channel that the probe is connected to.

What's in the Box

• 5x Straight Tip
• 5x Pogo Tip
• 1x L In Adapter
• 1x Z Ground
• 1x Y Lead Adapter
• 1x Right Angle Pin Lead
• 1x Straight Pin
• 1x Right Angle Pin
• 1x Straight Pin
• Channel ID Clips (Set of 4 colors)