Techni-Tool
Instek
Instek

Instek PSB-2400L DC Power Supply, Single Output, Multi Range, 80 V, 40 A, 400 W, PSB-2000 Series

Our Part #25371.1

Condition:New

Mfr Part #PSB-2400L

Instek PSB-2400L
Instek
Instek

Instek PSB-2400L DC Power Supply, Single Output, Multi Range, 80 V, 40 A, 400 W, PSB-2000 Series

Our Part #25371.1

Condition:New

Mfr Part #PSB-2400L

$1,500.00EACH

Programmable, Multi-Range/High-Voltage Output

  • Output Power Rating: 400W & 800W
  • Output Voltage Rating: 80V / 800V
  • Constant Power Output for Multi-Range (V & I ) Operation
  • Series and Parallel operation (2 units in series or 4 units in parallel Max.)
  • 90 Degree Angle Rotatable Panel Operation (Vertically or Horizontally)
  • Sequence Function edited by PC will be controlled through power supply interfaces
  • USB / RS-232 / Analog Control interfaces standard
  • GPIB optional
  • Two-year warranty

4:1 High Power, Programmable and Multi-range Output DC Power Supplies
GW INSTEK PSB-2000 Series consists of six models: PSB-2400L, PSB-2800L, PSB-2400L2, PSB-2400H, PSB-2800H, and PSB-2800LS. Output voltages are 0-80V and 0-800V in 400W and 800W packages. The PSB-2000 Series is also Series- and Parallel-compatible. A Booster unit acts like a slave to extend the current when matched with a master unit. A Hi-Ω mode prevents reverse current discharge. The power supply and display can be rotated 90° to save bench space.

The PSB-2000 Series provides three sets of Preset Function keys to memorize regularly used voltage, current, and power settings so they can be recalled quickly. The Sequence Function mode can produce output conditions defined by a sequence of voltage and current steps. These steps are created in a CSV file which is uploaded to the power supply via computer. This function is useful to establish a standard test procedure for the verification of the influence on DUTs by the swiftly changing operating conditions.

The PSB-2000 Series has over-voltage and over-current protection. The power supply output function will be shut down to protect DUTs when the protection mechanism is triggered. When changing batteries, the Hi-Ω mode of the PSB-2000 Series will prevent reverse current from damaging the power supply.

The PSB-2000 Series power supplies have an analog control interface on the rear panel for control via the external voltage or to externally monitor voltage and current output status of the power supply. The PSB-2000 Series front panel can be rotated 90° horizontal or vertical to accommodate your workspace.Instek PSB-2000 90 Degree Angle Rotatable Control Panel

  • Multi-Range Operation
  • Analog control
  • Parallel and Series Operation
  • Tracking and Delay Functions (PSB-2400L2)
  • Hi-Ω and Remote Sense Functions
  • Preset, Sequence, OVP, and OCP Functions
  • 90 Degree Angle Rotatable Control Panel

PSB-2000 Series Multi-Range DC Power Supplies

Model Type Channels Voltage (V) Current (A) Power (W)
PSB-2400L Master / Slave 1 0 - 80 0 - 40 10 to 400
PSB-2800L Master / Slave 1 0 - 80 0 - 80 10 to 800
PSB-2400L2 Master / Slave 2 0 - 80
(x2)
0 - 40
(x2)
10 to 400
(x 2 channels)
PSB-2400H Master / Slave 1 0 - 800 0 to 3 0 to 400
PSB-2800H Master / Slave 1 0 - 800 0 - 6 0 to 800
PSB-2800LS* Slave Unit for
PSB-2800L Only
N/A 0 - 80 0 - 80 10 to 800

* PSB-2800LS: a booster unit acting as a slave to extend current, cannot operate alone. It must operate with PSB-2800L master.

Note: Output Volts x Amps cannot exceed the maximum power rating. For instance, when PSB-2400L output is 80 V, the maximum current is 5 A (400 W total). Similarly, when PSB-2400L output is 40 A, the highest voltage is 10 V (400 W total).

Includes: user's manual (CD), AC power cord, external control connector (26-pin), screws for output terminals on rear panel, protection covers for output terminals on rear panel, protection caps for output terminals on the front panel, GND cable, USB cable for models PSB-2400L, PSB-2800L, PSB-2400L2, PSB-2400H, PSB-2800H, local bus for models PSB-2400L, PSB-2800L;, PSB-2400L2, PSB-2400H, PSB-2800H


BrandInstek
Number of OutputsSingle Output
Output Voltage80 V
Power Rating400 W
SeriesPSB-2000 Series
Voltage Range Selector50-99.9
InterfaceGPIB,USB,RS-232C
Mounting TypeBench Top
Output Current40 A
Current Range Selector30-49.9
Input Voltage100-240 VAC
Special FeaturesMaster/Slave Modes, V/I Measurement
Power Range Selector200-499
DisplayLCD
ProgrammableYes
$1,500.00EACH