Techni-Tool
SKF USA
SKF USA

SKF USA TWIM 15/230V Induction Heater, 230 V, 50 Hz,LED Control Panel, TWIM 15 Series

Our Part #10182772

Condition:New

Mfr Part #TWIM 15/230V

SKF USA TWIM 15/230V
SKF USA
SKF USA

SKF USA TWIM 15/230V Induction Heater, 230 V, 50 Hz,LED Control Panel, TWIM 15 Series

Our Part #10182772

Condition:New

Mfr Part #TWIM 15/230V

$6,518.75EACH
  • Innovative heating of bearings
  • Portable, compact and lightweight
  • No support yokes required
  • Automatic temperature monitoring
  • Detects bearing size and heats appropriately
  • Different power levels
  • User-friendly LED control panel
  • Quiet operation

The SKF portable induction heater TWIM 15 is designed for applications in maintenance jobs to heat up bearings that are mounted with an interference fit onto a shaft. Heating the bearing causes it to expand, which eliminates the need to use force during installation. Generally, using the TWIM 15 to generate a 90 °C (162 °F) temperature difference between the bearing and shaft is sufficient to enable installation. In addition, the TWIM 15 can be used to heat other ring-shaped, metallic components, providing flexibility of use.
Utilizing electrical power, the TWIM 15 features glass-fiber, high-temperature-resistant plastic construction that allows a low temperature difference between the inner and outer rings of the bearing. This helps to reduce internal tensions that are generated due to excessive thermal expansion of the inner ring compared to the outer ring.
The unit has a user-friendly LED control panel that requires no special training and is simple to understand. The panel is used to regulate temperature and also indicates that the TWIM 15 is operational.
Note: The displayed image is part of a series and may not precisely represent the exact appearance of the product.
Versatile
Because of the induction plate’s flat shape, a support yoke is not needed. This increases the type of components that can be heated on the plate and also reduces the number of required accessories.
Portable
Due to the medium-frequency technology used and choice of materials, the heater is lightweight. Also, the built-in handle makes it convenient to transport, and it can be stored easily.
Innovative heating
Utilizing smart construction and operating software, the heater creates a low temperature difference between the inner and outer ring of the bearing. This reduces the internal tensions generated due to excessive thermal expansion of the inner ring compared to the outer ring
Power regulation
Featuring different power settings, the TWIM 15 can heat sensitive components at a slower pace. Also, a non-bearing power configuration is possible where most of the power is focused on the bore of the component.
Quiet
Using medium-frequency technology to heat components does not generate noise. A LED indicates when the TWIM 15 is heating, even if you cannot hear it. In parallel, a cooling fan might be heard to help the heater's electronics to stay cool.

Brand: SKF USA
Type: Induction Heater
Voltage: 230 V
For Use With: Bearing Heating
Frequency Range: 50 Hz
Includes: Magnetic K-Type 400 mm Temperature Probe TWIM 15-3, Temperature-Resistant Gloves TMBA G11, Instructions Manual
Maximum Power: 2.3 kV
Series: TWIM 15 Series
$6,518.75EACH