Techni-Tool
Tripp Lite
Tripp Lite

Tripp Lite B160-100-DPSI DisplayPort over IP Extender Receiver over Cat5/Cat6, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA

Our Part #10054175

Condition:New

Mfr Part #B160-100-DPSI

Tripp Lite B160-100-DPSI
Tripp Lite
Tripp Lite

Tripp Lite B160-100-DPSI DisplayPort over IP Extender Receiver over Cat5/Cat6, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA

Our Part #10054175

Condition:New

Mfr Part #B160-100-DPSI

$170.00EACH
  • Compatible with Tripp Lite B160-Series A/V over IP transmitters
  • Display video from any source, analog or digital
  • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
  • Scales up to multi-in, multi-out installation with network switch
  • Plug and play—no software or drivers required

Receives IP-based audio + video signal transmitted point-to-point from a source 328 ft. away via Cat5e/6 cable or through a dedicated Ethernet network switch.
DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling
■ Receives IP-based audio/video transmitted point-to-point from a source 328 ft. away
■ Add low-cost network switches between transmitter and receiver to continue extending distance up to 328 ft. per switch Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers
■ Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
■ IGMP-enabled switches allow centralized control over which sources show on which displays
■ Displays video from any analog or digital source, so you can mix and match technologies and use existing sources and monitors Enhanced Technical Features
■ Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
■ Uses H.264 video compression standard
■ Transmits on 20–60 kHz IR frequency
■ Extends IR control signals that control a source from a remote display
■ Supports RS-232 serial baud rates up to 57600 Bps
■ HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter Plug-and-Play Functionality
■ No software or drivers required
■ Hardware included for mounting on wall, rack or pole
■ Compatible with all Tripp Lite B160-Series A/V over IP transmitters TAA-Compliant
■ Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

BrandTripp Lite
IncludesReceiver unit, External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A), Plug adapters for U.S., U.K., Europe and Australia, IR-In cable, 3.5 mm to DB9 adapter cable (M/M), Mounting hardware, Owner’s manual
NoteBatteries not Required to Operate
Warranty Information1-year limited warranty
$170.00EACH