Techni-Tool
Information notification
Due to ongoing tariff updates, pricing is subject to change and may not reflect the latest surcharges.
Tripp Lite
Tripp Lite

Tripp Lite B160-001-HDSI DVI/HDMI over IP Extender Transmitter over Cat5/Cat6, RS-232 Serial and IR Control, 1920 x 1080 (1080p), 328 ft. (100 m), TAA

Our Part #10054172

Condition:New

Mfr Part #B160-001-HDSI

Tripp Lite B160-001-HDSI
Tripp Lite
Tripp Lite

Tripp Lite B160-001-HDSI DVI/HDMI over IP Extender Transmitter over Cat5/Cat6, RS-232 Serial and IR Control, 1920 x 1080 (1080p), 328 ft. (100 m), TAA

Our Part #10054172

Condition:New

Mfr Part #B160-001-HDSI

$230.00EACH
  • Compatible with Tripp Lite B160-Series A/V over IP receivers
  • Video source can be sent to any analog or digital display
  • Supports video resolutions up to 1920 x 1080 (1080p) - Limited to maximum resolution of receiver
  • HDMI output on transmitter for connecting local display
  • Plug and play—no software or drivers required

Converts HDMI or DVI audio/video to an IP-based signal that is transmitted point-to-point to a receiver 328 ft. away via Cat5e/6 cable or through a dedicated Ethernet network switch.
Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling
■ Converts audio/video to an IP-based signal that is transmitted point-to-point to a display 328 ft. away
■ Add low-cost network switches between transmitter and receiver to continue extending distance up to 328 ft. per switch
■ HDMI output for connecting a local display Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers
■ Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
■ IGMP-enabled switches allow centralized control over which sources show on which displays
■ Video source can be sent to any analog or digital display, so you can mix and match technologies and use existing monitors Enhanced Technical Features
■ Supports video resolutions up to 1920 x 1080 (1080p)
■ Uses H.264 video compression standard
■ Transmits on 20–60 kHz IR frequency
■ Extends IR control signals that control a source from a remote display
■ Supports RS-232 serial baud rates up to 57600 Bps
■ HDCP and 3D compatible when used with a DisplayPort or HDMI receiver Plug-and-Play Functionality
■ No software or drivers required
■ Hardware included for mounting on wall, rack or pole
■ Compatible with all Tripp Lite B160-Series A/V over IP receivers TAA-Compliant
■ Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

BrandTripp Lite
IncludesTransmitter unit, External power supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 2A), Plug adapters for U.S., U.K., Europe and Australia, IR-Out cable, HDMI-to-DVI adapter cable, Mounting hardware, Owner’s manual
NoteBatteries not Required to Operate
Warranty1 Year
Warranty InformationLimited warranty
$230.00EACH

Copyright © 1996–  TestEquity LLC.
All rights reserved.