Techni-Tool
Hakko
Hakko

Hakko FT700-05 Tip Polisher with Tip Tinner

Our Part #821SO700

Condition:New

Mfr Part #FT700-05

Hakko FT700-05
Hakko
Hakko

Hakko FT700-05 Tip Polisher with Tip Tinner

Our Part #821SO700

Condition:New

Mfr Part #FT700-05

CA Prop 65
$168.47EACH
Calif. Prop 65
  • Fast and easy way to keep your soldering iron tips clean and free from oxidation
  • Two spinning polishing brushes (brushes will not damage tip plating)
  • Lead-free chemical paste for immediate tip tinning

When hand soldering with Lead-Free alloys, higher tip temperatures and highly-active fluxes causes oxidation and corrosion, which greatly decreases the life of your soldering iron tip. The Hakko FT-700 tip polisher helps increase the life of your tip by keeping it clean and free from oxidation easily and quickly.

Great for Lead-Free solder!

A maintenance kit to renew oxidized soldering iron tips!

The Hakko FT-700 Tip Polisher helps increase the life of your tip with the action of two spinning polishing brushes. The Hakko FT-700 is an expeditious and efficient way to boost tip life and keep free from oxidation. Comes with the Hakko FS-100 Tip Polish, which has been specially formulated to boost the life of your tip and is powerfully effective when used with the Hakko FT-700.

When hand soldering with Lead-Free alloys, higher tip temperatures and highly-active fluxes causes oxidation and corrosion, which greatly decreases the life of your soldering iron tip. The Hakko FT-700 tip polisher helps increase the life of your tip by keeping it clean and free from oxidation easily and quickly.

Features:

  • FAST and EASY way to keep your soldering iron tips clean and free from oxidation
  • Two spinning polishing brushes (brushes will not damage tip plating)
  • Lead-free chemical paste for immediate tip tinning

Immediately After Soldering:

  1. Insert the tip between the two spinning polishing brushes to clean the tip and remove the oxide, then
  2. Dip the tip into the FS-100 lead-free chemical paste to re-tin the tip The fine powder Sn is melted immediately.
  3. After applying the Hakko FS-100 to the tip:
  4. Insert the tip between the spinning brushes of the FT-700 to remove the melted chemical paste, then
  5. Tin the tip with the solder you are currently using before placing the iron in the holder. [This prevents the flux residue of the FS-100 from the PWB.]

This process will restore new life to your soldering iron tips. Incorporate the procedure above into your soldering routine and you will quickly realize the benefits of maintaining a clean, oxidation-free tip, especially when working with Lead-Free alloys.

Note: The FS-100 chemical paste is included with the FT-700 tip polisher.


BrandHakko
Alternate Product NumberFT700 05, FT70005
$168.47EACH