• Low charging crepe paper (7.0 mils thick) with high-tack rubber adhesive
• Temperature resistance to a maximum of 135°C (275°F) for 45 minutes
• Surface resistance 10⁸ - 10¹¹ ohms
• Adhesive: natural rubber based, non-staining, solvent spread, cured
• Adhesion strength: 38 N/100 mm / 35 oz/in2
• Tensile strength: 385 N/100 mm / 22 lbs/in2
• Meets CDN spec.: 53.79-94 type 1, meets US spec.: A-A 883-B-type 1
• Adhesion to steel: 35 oz/inch2
• Elongation: 8%
• Government specs: PPP-T-42C
• Type 1, CID-AA-883A type 1
• Non-toxic, and pH neutral
• Non-corrosive

• Low Charging Crepe Paper (7.0 Mils Thick) With High-Tack Rubber Adhesive
  Wescorp tape does tribocharge, but has minimal charge retention, making it safe to use around most ESD sensitive items.*
• Temperature Resistance to a Maximum of 135°C (275°F) for 45 Minutes
• Surface Resistance 1 x 10⁸ to < 1 x 10¹² ohms
  Tested per ANSI/ESD S11.11 to meet dissipative limits of packaging standard ANSI/ESD S541.
• Lead-Free RoHS Compliant

*All tapes will generate some amount of triboelectric charge when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape.