Skip to Content
You have new quote information. View My Dashboard ×
This is main content

FREE ASG POWER SUPPLY with purchase of a TL, A, CL, BLG, or SS Series Driver!

Purchase any of the following drivers before December 31, 2020 and RECEIVE A FREE CORRESPONDING POWER SOURCE!

PS-55 Single Power Source
Switchable 2-speed output for precision low voltage electric drivers. Delivers over 30 VDC on high setting - extra when needed. Standard clutch signal output can be used with counters or programmable logic controller to monitor driver. Circuit breaker protected. Can be used with either 110 or 220 VAC input via external switch.  

CLT-60 Single Power Source
Fused input voltage with circuit breaker protected output. Switchable output voltage gives two-speed option on drivers.

CLT-80 Single Tool Control Power Supply
Switchable output voltage provides two-speed option for use with BL-Series drivers. 110-240 VAC.

T-70 BL-Series Power Pack
For BL-Series drivers. Switchable output voltage provides two-speed option for drivers. 110/240 VDC (Input), 21-31 VDC (Output).

 

 

TL-Series Precision Torque DC Drivers

  • Automatically stops when pre-set torque is reached
  • Balanced ergonomic design
  • Exceptionally lightweight - 11.5 oz.
  • Reduced vibration and noise
  • Low voltage DC operator
  • Double insulated
TT No. Model Torque Drive Size RPM on High RPM on Low Free Power Supply
106SC5605 TL-6500 1.5-17 lbf/in 1/4" Hex 700 500 PS-55
106SC5606 TL-6500ESD 1.5-17 lbf/in 1/4" Hex 700 500 PS-55
106SC5601 TL-3000 .25-4.0 ibf/in 1/4" Hex 1000 700 PS-55
106SC5602 TL-3000 .25-4.0 ibf/in 4.0 mm 1000 700 PS-55
106SC5603 TL-3000ESD .25-4.0 ibf/in 1/4" Hex 1000 700 PS-55

 

BL-Series Brushless Drivers

  • Brushless motor with magnetic switches extends driver life
  • For high production environments
  • Compact design, lightweight
  • No mechanical switches to wear out
  • Precise torque control: driver automatically stops when pre-set torque is reached to eliminate over- or -under- tightening
  • All metal gears
TT No. Model Torque Approx. RPM Drive Size Free Power Supply
106SC4271 BL-5000 2 - 11 lbf/in 1000 4.0 mm PS-55
106IN4275 BL-5000 2 - 11 lbf/in 1000 1/4" Hex PS-55
106SC5501 BL-5000-ESD 2 - 11 lbf/in 1000 1/4" Hex PS-55
106SC5504 BL-7000 6.1 - 24 lbf/in 1050 1/4" Hex PS-55
106SC5506 BL-7000HT 6.1 - 30 lbf/in 740 1/4" Hex PS-55

 

BLG-Series Drivers

  • Designed for medium to light torque applications
  • Carbon dust is eliminated; great for cleanroom assembly requirements
  • Anti-static plastic body is ideal for delicate assembly situations
  • Excellent flexibility for small fasteners or vacuum pick-up applications
     
TT No. Model Torque Approx. RPM Drive Size Free Power Supply
106IE5561 BLG-4000 .4 - 4.8 lbf/in 1000 4.0 mm PS-55
106IN4275 BLG-4000X .4 - 4.8 lbf/in 1000 1/4" Hex PS-55
106SC5501 BLG-5000X-HT 4.4 - 17.7 lbf/in 730 1/4" Hex PS-55

A-Series Torque Drivers

  • For standard to medium torque applications using #1 to #10 screws (2.0 mm to 5.0 mm)
  • Feature a rare-earth magnet motor for more power.
  • Provide considerably higher RPM ranges and torque ranges than corresponding CL-Series tools.
TT No. Model Torque Approx. RPM @30VDC Approx. RPM @20VDC Drive Size Free Power Supply
106SC4113 A-4500 3.5 - 7 lbf/in 1400 1200 1/4" Hex PS-55
106SC281 A-5000 2.0 - 11 lbf/in 970 700 1/4" Hex PS-55
106SC224 A-6500 4.5 - 16 lbf/in 1400 -- 1/4" Hex CLT-60

 

CL-Series High Performance Drivers*

  • Designed for production environments where torque repeatability is a must to maintain quality standards
  • Recommended wherever cleanroom assembly or static control is an issue
  • Intended for vertical insertion of fasteners
  • Torques are adjusted externally; tamper-proof torques are available
  • Drivers available in Small, Medium, Standard & Large Sizes
TT No. Model Torque Approx. RPM @30VDC Approx. RPM @20VDC Drive Size Free Power Supply
106SC107 CL-2000 2.7 - 27 ozf/in 680 490 4.0 mm PS-55
106SC4109 CL-3000 3 - 25 ozf/in 1000 670 4.0 mm PS-55
106SC111 CL-4000 .5 - 4.5 lbf/in 1000 670 4.0 mm PS-55
106SC641 CL-4000 .5 - 4.5 lbf/in 1000 670 1/4" Hex PS-55
106SC121 CL-6500 1.2 - 14 lbf/in 910 600 1/4" Hex PS-55
106SC120 CL-6500-PS 1.2 - 14 ibf/in 910 600 1/4" Hex PS-55
106SC124 CL-7000 2.6 - 24 ibf/in 750 500 1/4" Hex CLT-60
106SC125 CL-7000-PS 2.6 - 24 ibf/in 750 500 1/4" Hex CLT-60

 

SS-Series Shock Absorbing/Soft Stop Tools

  • Same as CL tools but with extra shock absorbing features
  • Ideal for use on impact-sensitive equipment
  • Reduces impacts by approximately 80% when fastening
TT No. Model Torque Approx. RPM Drive Size Free Power Supply
106SC285 SS-3000 .26 - 1.74 lbf/in 1000 4.0 mm PS-55
106SC287 SS-4000 .9 - 4.0 lbf/in 1000 1/4" Hex PS-55
106SC134 SS-6500 2.2 - 11 lbf/in 900 1/4" Hex PS-55
106SC136 SS-7000 2.6 - 17.5 lbf/in 750 1/4" Hex PS-55

 

 

Back to top