Here's a powerful soldering station that delivers the heat you
want to the soldering area FAST!
Process control allows you to select the soldering temperature you want, without
changing the tip - one tip, any soldering temperature! Four buttons on the front
let you further adjust tip temperature to specific applications. Replaceable
ergonomic grip. LED in handpiece stays illuminated when iron is hot. Unit can
be programmed to shut off after 30 minutes of inactivity.
Features:
• Unique cartridge and soft grip design allows tips and grips to be quickly
and easily replaced
• Tip is automatically programmed to accurate tip temperature setting
by simply inserting it into the process gate
• Tip is registered at the factory and automatically read by the station
when inserted into the process gate
• Built-in heating element
• Tip temperature can be changed without changing the tip
• No calibration required
• More than 75 T7 tip configurations available
• Once the tip temperature setting and process parameters are set, they
are "locked" into the system memory and they cannot be changed without
the lockout key card
• Red ring LED in connector stays illuminated when the iron is hot
• Low tip temperature alarm
• Automatic shut off
• Signal display reads °C or °F
• ESD-safe by design
• Lead-free approved
Specifications: Power Consumption: 75W (Max. 140W) Temperature Range: 200°C - 450°C (400° - 840°F) Temperature Accuracy: ±10°C (±18°F) Temperature Stability: ±5°C (±9°F) at
idle temperature Station Output voltage: 24V Station Dimensions: 7" x 4.7" x 4.2" Soldering Iron Power Consumption: 70W (24V) Tip-to-Tip Ground Resistance: Under 2O Tip-to-Tip Potential: Under 2mV Total Length w/o Cord: 7.4" with T7-D24 tip Weight w/o Cord: 1.07 Oz. with T7-D24 tip Cord Length: 4 ft. Dimensions: 7"L x 4.7"W x 4.2"H
Hakko Model No FM202-01
Techni-Tool Part No. 821SO202
