Pistol or Pencil in one tool - Meets demands of lead-free soldering

The FM-2024 Desoldering Tool is the latest in the modular series of accessories for the FM-202 station. The desoldering tool also works with the FP-102 Soldering Station. Designed to meet the demanding needs of lead free soldering, nozzle/heater cartridge provides superior thermal recovery and easy nozzle change. Operators no longer need to decide between a pistol or pencil style of desoldering tool; the FM-2024 can be switched between either configuration. The solder collection filters are disposable and easy to replace. The FM-2024 utilizes shop air to create the vacuum. Nozzles not included. You must have a FM-202 with at least software version 7 to operate the FM-2024. Call for FREE software upgrade.

The FM-2024 contains:
• Desoldering control box
• Desoldering tool w/filter pipe assembly
• Iron holder
• Handle (for gun configuration)
• Cleaning drill
• Nozzle remover
• Rubber feet (for use with FP-102)

Specifications:

Desolder Control Box (DCB):
• Power consumption: 12W
• Output: 24V
• Vacuum generator: Ejector type
• Vacuum pressure (max.): 93kPa (700mmHg) (28"Hg)
• Suction flow: 28 l/min.
• Tip to ground potential: <2mV
• Applied air pressure: 490kPa (5.0kgf/cm2) when in use
• Compressed air consumption: 1.62c.f.m. (46 l/min.)
• Outer dimension, less cord: 4.7" (119mm) wide x 1.8 " (45mm) high x 6.8" (172mm) deep
• Weight: 2.6 lbs. (1.2kg)

Desoldering Tool:
• Power consumption: 70W (24V)
• Temperature range: 650°-840°F (350°-450°C)
• Tip to ground potential: <2mV
• Tip to ground resistance: <2Ohm
• Length, less cord: 7.09" (180mm)
• Weight, less cord and hose: 0.14 lb. (65g)
• Length of cord: 4ft. (1.2m)

Hakko Model No. FM-2024
Techni-Tool Part No. 821SO2024