Fluke Process Calibrators Fluke 741B, 743B and 744 Documenting Process Calibrator Whether you're calibrating instruments, troubleshooting a program,
or running planned maintenance, the multifunction Fluke 740 Series
Documenting Process Calibrators help get the job done faster. Features:
Calibrate temperature, pressure, voltage, current, resistance
and frequency; Measure pressure using Fluke 700 pressure modules;
Measure any source with one compact, rugged, reliable tool; Create
and run automated as found/as left procedures. Supports linear,
square-root devices plus one-point and two point limit switches;
Record, document and transfer results to PC; Auto step and auto
ramp functions; Measures custom units and user entered values; Fluke
744 has all the features of a 743B plus HartŪ communication functions.
Specifications: Data log: Measures V and mA, ohms, frequency, temperature, and
pressure
One to 60 readings per minute. 8000 readings max.
Ramp: Source V, mA, frequency, and temperature. Four steps/sec.
Trip, detect on continuity or voltage
Loop power: Selectable, 24V or 28V 22 mA max
NiCad 7.2V internal battery pack
Calculators: 4 functions plus square-root, store and recall are
built-in
Includes:
· TL224 industrial test leads (2 sets)
· AC220 test clips (2 sets), TP220 test probe, BP7217 battery
pack and charger
· Instruction manual
· NIST traceable calibration certificate with data, serial
port cable (Model 743B only)
· DPC/TRACK sample version with free PC communications utility
software (Models 743B and 744 only)
· Three-Year Warranty (USA)
Fluke Model No. 741B-120
Techni-Tool Part No. 374TE7044
Fluke Model No. 743B-120
Techni-Tool Part No. 374TE7045
Fluke Model No. 744-120
Techni-Tool Part No. 374TE7046
Fluke 725/726 Multifunction Process Calibrators
Fluke 726 Multifunction Process Calibrator
Designed specifically for the Process industry with broad workload
coverage, calibration power and unsurpassed accuracy in mind. The
726 measures and sources almost all process parameters and can calibrate
almost anything. The 726 will also interpret results without the
help of a calculator and store measurement data for later analysis.
Features:
· Two separate channels
· Measure, source and view process signals simultaneously
· Measure volts, mA, RTDs, thermocouples, frequency, and resistance
to test sensors and transmitters
· Source/simulate volts, mA, thermocouples, RTDs, frequency,
and pressure to calibrate transmitters
· Source mA with simultaneous pressure measurement to conduct
valve and I/P tests
· Integrated pressure switch test allows you to capture the
set, reset and deadband of a switch
· Memory storage for up to 8 calibration results
· Measure pressure using Fluke 700 pressure modules
· Three-Year warranty.
Fluke 725 Multifunction Process Calibrator
Use the measure and source functions in the Fluke 725 to test and
calibrate almost anything. Easy-to-read screen lets you view input
and output simultaneously. Measure pressure and frequency to test
sensors and transmitters. Measure pressure using Fluke 700 pressure
modules. Source mA with simultaneous pressure measurement to conduct
valve and I/P tests. Support flow meter testing with frequency and
counts per minute (CPM) functions. Remote interface allows benchtop
automated operation.
Features:
· Easy-to-read measure/source backlit screen
· Perform fast linearity tests with auto step and auto ramp
features
· Power transmitters with internal loop supply
· Store frequently-used test setups for later use
· Measure, source, simulate volts, mA, RTDs, thermocouples
and ohms to calibrate transmitters
· Three-Year Warranty
Includes: TL75 test leads, AC72 test clips, one pair stackable
test leads, user manual on CD; NIST-traceable certificate of calibration.
Fluke Model No. 725-US
Techni-Tool Part No. 374TE7043
