Weller HAP1 hot air pencil and stand
Techni-Tool Part No. 272IR003
Weller WRS1002X Station
Station features 80W of power for faster heat up and better performance. Includes
DXV80 desoldering pencil with internal disposable solder collection tube. Air
flow 1- 10 l/min. Uses DX series desoldering tiplets. Techni-Tool Part No. 272SO1002
Weller DXV80 desoldering pencil with DX112 tiplet Techni-Tool Part No. 272SO800
Weller AKV80 stand for DXV80 pencil Techni-Tool Part No. 272SO890
Weller Disposable solder collection tube, 5/pk Techni-Tool Part No. 272SO815
Weller WHA900 Hot Air Station
Maintain nozzle temperature regardless of hot air flow rates. Sensor at nozzle
continuously samples temperature and instantly adjusts heat to maintain preset
temperature. 650 watts of power, internal air adjustable from 5 l/min to 50
l/min, temperature variable from 100°F to 1,000°F.
Features:
· Suitable for use with lead-free solders
· Power to work on most multi-layer boards
· Front panel push-button activates hot air and sets unit back to pre-defined
temperature and airflow settings
· Sturdy and flexible corrugated burn-proof air hose
· User-set temperature offset for deviation in actual and air temperature
setting
· Includes sturdy aluminum safety rest for hot air pencil
· Uses Weller hot air nozzles (sold separately)
Weller WHA3000 Self-Contained Digital Hot Air System
Great for difficult repairs on circuit boards with fine-pitch components and
a large number of leads. Handles most ground planes and multi-layer boards.
Automatic preheat/soak/reflow temperature/time profile increases productivity
and quality of your rework jobs. Bright, clear LCD for easy reading of parameter
settings. Specs: Voltage: 120V; Temperature Range: 122°F–1022°F (50°C–550°C);
Air Flow Volume: 5–50 l/min. HAP3 Hot Air Pencil and nozzle have built in vacuum
pick up. When pencil is placed in stand, unit switches into standby mode and
operates at the lower pre-heat temperature and airflow rate. Preheat holder
fixes PCB boards up to 12.20" x 12.60" (310 x 320mm) in the x-y direction.
In combination with the preheat plate, they reduce thermal damage by heating
board from two directions. Temperature Range: 122°F – 752°F (50°C – 400°C)
Hot air station with HAP3 hot air pencil, stop and go stand, board holder and
pre-heat plate, 120V. (WHA3000PS) Techni-Tool Part No. 272SO3300
Hot air station with HAP3 hot air pencil, stop and go stand, 120V. (WHA3000P) Techni-Tool Part No. 272SO3100
Pre-heat plate with digital temperature readout (WHP3000) Techni-Tool Part No. 272SO3395
