These synthesized in-circuit LCR/ESR meters in a bench mount or
handheld design are high accuracy test instruments used for measuring
inductors, capacitors and resistors.
BK Precision Model 889A Bench LCR/ESR Meter with Component Tester
Features:
· Measurement parameters: Z, L, C, DCR, ESR, D, Q, ACV, DCV,
ACA, DCA and Ø
· Test conditions: 100Hz, 120Hz, 1kHz, 10kHz, 100KHz, 200KHz,
1Vrms, 0.25Vrms, 0.05Vrms
· 0.1% basic accuracy
· Dual LCD display
· Very quick response, user friendly
· Fully auto/manual selection
· DC resistance measurement
· RS-232 interface capability
· One Year Warranty
BK Precision Model No. 889A
Techni-Tool Part No. 310TE889
BK Precision Models 885/886 Handheld Synthesized In-Circuit
LCR/ESR Meters
The first handheld meter of this type on the market, with a wide
range of test frequencies up to 100kHz and many measurement parameters
including Z, L, C, DCR, ESR, D, Q, and Ø. Designed for both component
evaluation on the production line and fundamental impedance testing.
With a built-in direct test fixture, you can test the lead components
very easily.
Features:
· Test conditions: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz, 1Vrms,
0.25Vrms, 0.05Vrms
· 0.5% basic accuracy
· Dual LCD display
· SMD Surface Mount Tweezer Probe included
· Very quick response, user friendly
· Fully auto/manual selection
· DC resistance measurement
· Rechargeable battery / AC powered
· Infrared RS232 interface capability
· Two Year Warranty
BK Precision Model No. 885
Techni-Tool Part No. 310TE885
BK Precision Model No. 886
Techni-Tool Part No. 310TE886
BK Precision Universal LCR Meter with Statistical Functions
Measures components in either series or parallel mode, and simultaneously
displays measured value and Q or dissipation factor. Prompts you
to calibrate with an open or short.
Features:
· Selectable test frequencies 100Hz, 120Hz, 1KHz, 10KHz (Model
879), 120Hz, 1KHz (Model 878A)
· Simultaneously displays measured component value and Q
or Dissipation Factor (D)
· Display hold
· Relative mode
· Tolerance mode
· Backlight (Model 879)
· RS 232 Interface (cable and software required)
· Includes Test lead and AC power adapter · One Year
Warranty
BK Precision Model No. 878A
Techni-Tool Part No. 310ME878
BK Precision Model No. 879
Techni-Tool Part No. 310TE879
BK Precision Model 875B Low Ohm LCR Meter
Measure inductors, resistors and capacitors quickly and accurately.
Utilizing special circuitry, the measurement more closely replicates
true in circuit measurements. Ten range resistance range measures
to 0.001 zero adjust removes leads resistance.
Features:
· Precision measurement of very low resistances
· Measures D (dissipation factor)
· Unique drop-proof construction
· Tilt stand
· Measures resistance using a test frequency that can cause
an inductive reactance
· Includes Test lead and AC power adapter
· Three Year Warranty
BK Precision Model No. 875B
Techni-Tool Part No. 310TE875
BK Precision 570A Linear/575A Digital IC Tester
Linear IC Tester’s built-in test library includes all common
Analog ICs including op-amps, comparators, voltage regulators,
voltage references, analog switches & multiplexes, opto-isolators
& couplers, and audio ICs. Digital IC Testers are able to
locate intermittent and temperature related faults by using its
unconditional or conditional loop testing modes. Battery operated.
Features:
BK Precision Model 570A
· Auto identification mode
· Conditional/Unconditional loop testing mode
· Functional test unit emulates passive circuitry to implement
a comprehensive test in a variety of configurations and gain settings
· Displays diagnostic information down to individual component
pins
· Rugged, hand held, battery operated
· Built-in membrane keypad, 2 x 16 dot matrix alphanumeric
LCD, and high quality 16 pin ZIF socket
· One Year Warranty
BK Precision Model 575A
· Comprehensive device library covers most TTL, CMOS, memory
and interface devices
· 40 pin capability (NAND gates or CPUs)
· Identifies unmarked and house-coded devices
· Detects intermittent and temperature related faults
· Displays diagnostic information for individual pins
· One Year Warranty
Specifications: DC Input: 6V, 300mA., regulated
Test Thresholds:
BK Precision Model 570A: Logic High: 2.2V Min. , Logic Low:
0.8V Max.
BK Precision Model 575A: Variable
(DAC controlled) Library IC's:
BK Precision Model 570A:
Operational Amplifiers, Comparators, Operational Amplifiers/Comparators,
Voltage Regulators, Voltage References, Analog Switches/Multiplexers,
Transistor Arrays, Optoisolators/Optocouplers, DACS/ADSC, Special
Functions ICs, Virtual Grounds, Audio ICs
