Techni-Stat Overhead Ionizing Blower
· AC technology with an inherent balance of ±5V
· 6 foot target distance
· Point cleaning feature for fast, easy maintenance
· Emitter points never need replacing
Provides the highest airflow and widest coverage area. Ideal
where fast discharge time is critical. Available in 3 or 4 fan models. Uses
reliable, low maintenance AC corona technology with high flow rate fans to
quickly discharge static.
Higher CFM in a smaller package with variable speed control Techni-Stat® High Mount Ionization Transport System Suspended over the workstation with the ionized air blowing down over the
area and neutralizing even the highest electrostatic charge. Normally the system
is mounted 30"-36" above the area to be controlled, producing a balanced
ionization pattern of approximately 36" wide x 48" long. Air
volume output: 175-315 CFM. Dimensions: 27-3/4"L x 6-3/4"W x 2-1/2"H.
One-Year Warranty. (USA)
Replacement Point Kit Three sets of four replaceable points in holder.
(12/Pk.)
Techni-Tool Part No. 758ST8000
Replacement Filter/Filter Media 6 foam filters with casing per pack.
(6 Pk.)
Techni-Tool Part No. 758ST1006
Techni-Stat VSE 3000 Self Balancing Static Eliminator
· Self-balancing for 0 ±5V balance
· Integrated heater & variable speed fan
· Removable emitter assembly for fast cleaning
· Emitter points never need replacement
An efficient workstation ionizer which effectively eliminates electrostatic
charges quickly and reliably. Produces an air volume of 80 to 160 CFM and floods
the entire workstation with static eliminating ions. Its patented self-balancing
circuitry maintains a balance of 0±5V & an individually controlled heater
provides operator comfort. Specs: Discharge time: 1000V to100V in <2
sec. Measures 12"W x 6.25"H x 10"D. (USA) 115 V
Techni-Tool Part No. 758ST3300
Also available with heat! Techni-Stat Table Top Ionizer - Variable Speed
A self-contained, compact, table-top ionizer capable of producing copious amounts
of both positive and negative ions. The variable speed fan permits a gentle
flow of ionized air, reaching a distance of six feet. A charged object, when
passing through the ionization field, becomes neutral instantaneously. Specs:
Size: 7-1/4"W x 8-1/2"H x 4-1/2"D; Air volume output: 65-105
CFM; self-contained power unit; meets EOS/ESD S3.1-1991. Coverage area:
2' x 6'. 220V available. 115V One-Year Warranty. (USA)
Techni-Tool Part No. 758ST0610
Techni-Stat Table Top Ionizer - with heater.
Techni-Tool Part No. 758ST7100
Replacement Filter/Filter Media for Table Top Ionizer -
Six foam filters with casings.
Techni-Tool Part No. 758ST1006
Techni-Stat® Air/Nitrogen Ionizing Guns
Specifically designed for neutralizing static and removing surface contamination
in non-clean room enviroments. Use this gun with shop air or any inert gas.
An in-line, input filter is required to remove moisture and contamination where
shop air is not guaranteed clean. Meets stringent cleanroom operating conditions.
“O” rings prevent any possibility of particulates bypassing the filter. All
guns utilize titanium points to insure long ionizer life with less maintenance.
(Requires power unit.) Specs: Max PSI: 40 (air)/60 (nitrogen); Output 4 kV; 0.45 micron non-absorbing
filter supplied; 8 ft. shielded power cable and air line supplied. (USA)
190M Air/Nitrogen Gun - .45 micron filter in nozzle.
Techni-Tool Part No. 758ST080
Techni-Stat Equal Ion Balanceable Power Unit
Ideal when sensitive electronic components require the use of static bars, guns
or nozzles to assure equal ion (+ plus, - minus). Powers 190M, 190C, and HPS
III. 220V available. (USA)
One Gun Standard Power Unit, 120V
Techni-Tool Part No. 758ST561
Two Gun Standard Power Unit, 120V Techni-Tool Part No. 758ST463
Techni-Stat Air Filter Regulator
Ensures clean shop air for all guns.
Techni-Tool Part No. 758ST4301
Techni-Stat PulseGun™ 5 Kit
Designed for cleaning and assembly applications where constant or extended usage
is required. Its powerful, focused gas/air flow rapidly neutralizes static charges
while blowing off dust and contaminating particles attracted to the product
surface.
Specs: Discharge time: <2 sec. at 6"; Cable connector: 7’; gas tube:
1/4" OD, 3/16" ID polyurethane; Air/gas supply: Inlet pressure 5 PSI
min, 100 PSI max. Supplied with airflow controller. 120 VAC. (USA)
Techni-Tool Part No. 758ST870
