Tech Duster "O"
Safely removes dust, dirt, oxide particles and other dry contaminants from delicate instruments. The high-pressure spray reaches the most inaccessible areas to remove dust instantly without residue. Will not scratch or abrade sensitive surfaces. Leaves no residual film. Moisture-free, non-toxic, non-corrosive, non-flammable, inert dusting gas is completely safe to use with all materials. Zero ozone depletion, noCFC's-NoHCFC's! Contains-HFC (134A). 81 psi pressure. Meets Federal specs BB- F-1421. Filtered to 0.3 microns.

10 oz. Disposable Can & Nozzle

Techni-Tool Part No. 758OZ134

Tech Duster “O”® System

Includes: 1 chrome valve nozzle and 1-10 oz. can of Tech Duster “O”.
Techni-Tool Part No. 758OZ140

Refill Can Only for Tech Duster “O”® System

Techni-Tool Part No. 758OZ137

Replacement chrome valve for Tech Duster “O”® System

Techni-Tool Part No. 754AC928

Big Blast™ Tech Duster “O”® High Velocity Dusting Gas

Exceptionally pure, moisture free, inert dusting gas. This high velocity dusting gas removes particles without the use of harmful solvents. Designed to remove microscopic contaminants and dust particles from all types of electronic equipment. Use where short blasts of large volumes of air are required. Quad filtered, non-flammable, non-ozone depleting and leaves no residue. Specs: Chemical Components: 1, 1, 1, 2-Tetrafluoroethane; Technical Data: Flash Point: None; Ozone Depletion Potential: 0; Vapor Pressure: 81psig @ 25.C; Non-Exempt Volatile Organic Compounds (VOCs): 0 g/l. Filtered to 0.3 microns. 10 oz. (USA)
Techni-Tool No. 758CH697

Isopropyl Alcohol

Versatile general purpose cleaner for many hand-cleaning situations. Surprisingly strong cleaner compared to competing brands. Easily removes light oils, grease, fingerprints, and the organic and ionic contamination found in fluxes. Mild enough for electronic and mechanical assemblies, stencils, ceramics, glass and plastics. Also cleans soft plastics, flexible belts and the recording heads in VCRs. Meets many military specs, including MIL-STD-2000 and WS-6536. Residue-free, rinsing not required. 16 oz. bottle.
Techni-Tool Part No. 758CH775

Freezer

Use as a troubleshooting aid for circuit board production. Chills to -62°F (-52°C) without any residue or damage to ozone. Non-flammable. 10 oz. aerosol.
Techni-Tool Part No. 758CH1672

Flux Remover

A highly affordable solvent for precision benchtop-level cleaning. Water-free alcohol base delivers more cleaning power than simple isopropyl alcohol. Removes most types of fluxes, including rosin, water-based, no clean and lead-free fluxes. A versatile cleaner, it also can remove light oils and grease, some inks, and adhesives. Can be used on electronic and mechanical assemblies, plastics and rubber. Dries relatively slowly, leaves no residues, rinsing is never required. 12 oz. aerosol.
Techni-Tool Part No. 758CH752

Non-flammable Defluxer

The industry’s most powerful benchtop defluxer. Exceptional performance on rosin, synthetic and no clean fluxes, including high temperature lead-free materials. Quickly dissolves all types of contamination, including corrosive ionic deposits, and removes both polar and non-polar contamination. Highly suitable for all types of electronics, including mnthru-hole boards, SMT designs, hybrids and connectors. Non-flammable, ESD safe, low aroma, non-corrosive, ozone safe and residue free. Excellent materials compatibility. Testing on soft plastics is recommended. 12 oz. aerosol.
Techni-Tool Part No. 758CH763

Contact Cleaner

A mild precision cleaner for light rinsing of electrical and electronics devices. Designed to flush away contamination more than dissolve it, this cleaner can gently remove light grease, oils, dust, lint, some fingerprints and light coatings of organic and inorganic contamination. Can be used on electronic assemblies, electrical connectors and devices, mechanical parts, plastics and rubber. Cleans soft plastics, flexible belts and the recording heads on VCRs. Dries relatively slowly but leaves no residue. Perfect for cleaning hard-to-reach places. Flammable - allow all components to dry thoroughly. 12 oz. aerosol can.
Techni-Tool Part No. 758CH741

Non-Ozone Depleting & Zero Residue!
Cleaner Degreaser

For light duty cleaning of electronic and electrical equipment, machinery and metal parts. Non-ozone depleting cleaner is non-corrosive and safe on plastics. Evaporates quickly, leaves no residue. 10 oz. aerosol.
Techni-Tool Part No. 758CH1620

Dispensing Oilers

Feature: flat tips for picking up depositing adhesives; non-rolling, color-coded handles for easy identification and dust caps for keeping tips clean. 12/Pk.

Extra Fine Dia. .008" (Black)
Techni-Tool Part No. 758IE0000

Fine Dia. .014" (Blue)
Techni-Tool Part No. 758IE0001

Medium Dia. .022" (Green)
Techni-Tool Part No. 758IE0002

Large Dia. .033" (Red)
Techni-Tool Part No. 758IE0003