Techni-Tool Double-Ended Applicator Brushes Two sizes. One side has a short flat end and the other side an extra stiff
chiseled end. A great alternative to hand-trimming acid brushes.
Techni-Tool Dissipative Brushes Nylon Bristle material is a static dissipative 0.016 nylon that is stiffer
than Statigo. Surface resistivity of 109. (USA)
Double ended, for heavy duty scrubbing and reaching
tight corners. Stainless steel handle, 4-1/2" OAL, 3/16" dia.,
bristle trim 1/4" tapered end, 1/2" flat end, stiffness like hog
bristle. (USA) Techni-Tool Part No. 758CH1005
Zinc plated steel handle, 4-1/2" OAL, 3/8" dia., bristle trim
3/16" tapered end, 1/4" flat end, stiffness like hog bristle.
(USA) Techni-Tool Part No. 758CH0010
Techni-Tool Technical Cleaning Brushes Heavy-duty metal handle, double-ended cleaning brush. Bristles are fine, anti-static
horsehair. One side1/4" flat trim, one side3/16". Chisel
trim. 3/8" diameter handle, 4-1/2" OAL. (USA) Techni-Tool No. 758CH032
Techni-Tool Applicator Brushes - Stainless Handle Stainless steel handle for excellent chemical resistance. Manufactured using
strong mechanical fiber clamping for maximum fiber retention. Static dissipative.
Insulative Plastic Handle Brushes An economical water resistant alternative to anti-static brushes. With a surface
resistivity of 1012-1016 Ω/sq., they are best used
in an environment where static is not critical to the task at hand, or where the
brush is submerged in liquid when in use. (USA) Use: Applying liquids
or fluids, as well as brushing.
Techni-Tool Plastic Handle Brushes Plastic toothbrush style handle, designed with hand grips, and bent to allow
knuckle room and prevent hand scraping.
Fill material: .006 Stainless; Trim: 7/16", Rows: 3 x 7, Handle L x dia.:
7-3/16" x 7/16" Techni-Tool Part No. 758CH028
Techni-Tool Insulative Instrument Cleaning Brushes Designed for cleaning in tight areas, the brush's fiber is mechanically clamped
in a stainless steel tube, is inserted into a Delrin handle. (USA) 1/4"
Diameter, 3/16" bristle trim length, 5/16" bristle width. Use:
Clean tight areas including instrumentation.
Techni-Tool Conductive ESD Brushes Brushes not only prevent ESD but dissipate it to the ground. ThunderonŽ
bristle fibers. 103 to 104 Ω/sq. conductivity. Black
dissipative polyethylene handles: 105 to 108 Ω/sq.
Techni-Tool Semi-Fine Bristle ESD Brush Use for electro-opticals, explosives, chemicals, plastics, monitors
and photographic sensitive equipment.
1/2" Semi-fine; 5-1/2" OAL Techni-Tool Part No. 758ST7753
2" Semi-fine; 6-1/3" OAL Techni-Tool Part No. 758ST7757
Techni-Tool Hard Round Brush Designed especially for circuit boards and electronics. Unique conductive
fibers (Thunderon) have excellent corona discharge properties. (USA)
1/8" Hard; 4-1/4" OAL. Techni-Tool Part No. 758ST7720
Techni-Tool Hard Static Brush
Curved, conductive plastic brush for delicate cleaning and scrubbing of
boards and more. 4" OAL. Techni-Tool Part No. 758ST7754
Techni-Tool Long Handle Static Brush Conductive plastic brushes with concave handle for thorough component
and circuit board cleaning.
Techni-Tool Dissipative Brushes With surface resistivity of 105 to 1011, these
brushes remove any static charge that will result in the adhesion of particles,
such as dust, to an object. Bristles are made of 100% ThunderonŽ, a conductive
filament, which dissipates a charge on an electrically charged surface.
9-3/4" OAL, 1/4" width, 1-1/4" trim. Techni-Tool Part No. 758CH183
4" OAL, 1/4" width, 1-1/4" trim. Techni-Tool Part No. 758CH437
Techni-Tool Block Brushes:
Techni-Tool ESD Block Scrub Brush
Clean and dust any ESD-controlled environment with this all-natural hand
scrub brush. They six row tuft pattern on a hardwood block is excellent for
large printed circuit board rework cleanup. Hog bristle, Trim: 3/4", Rows:
6 x 19, Handle: 7-1/8" x 2-1/4". Techni-Tool Part No. 758PR426
Techni-Tool Artist Brushes:
Techni-Tool Pure Red Sable Fine Detail Brushes Round shaped brush head in small sizes. For applying paint, epoxy, glue or
other liquids to tiny, hard to reach areas. 6-3/4" OAL.
Techni-Tool Lens Cleaning Brushes Made with soft goat hair, these brushes are excellent for removing dust
and dirt particles without scratching lens surface. (USA)
Techni-Tool DelrinŽ Handle Hand Laced Brushes 1, 2, or 3 rows hand tied into a DelrinŽ handle. Autoclavable for cleanroom
or sterile applications. Meets FDA 21 CPR-177, 2480 and ASTM D-6100 standards.
Techni-Tool Plywood Handle Hand Laced Brushes
Toothbrush-style plywood handle. Fill material, hand-tied with stainless
steel wire, remains secure even when moisture makes wood handle expand and contract.
Fill material: .003 Brass, Trim: 7/16", Rows: 3 x 7, Handle: 7-3/4"
x 7/16". Techni-Tool Part No. 758CH153
Techni-Tool Aluminum Handle Hand Laced Brushes Aluminum handle toothbrush-style scratch brush with 1 or 3 rows of bristles
hand-tied into handle for maximum bristle retention.
Techni-Tool 3 Row Plywood Handle Brushes
All-purpose toothbrush-style, bent for knuckle protection. This standard
tool is the basic brush for every tool kit. Trim: 7/16", Rows: 3 x
7, Handle: 7-3/4" x 7/16"
Techni-Tool 4-Row Plywood Handle Brushes A larger brush with a plywood handle and a bristle material for any
surface. Works well for cleaning or roughing. Trim: 3/4", Rows, 4 x
9 , Handle: 8-1/4" x 1-1/16".
Techni-Tool ESD Heavy-Duty Brush Heavy-duty scrubber and duster with hog bristles that works well when
cleaning sticky, crusty materials or viscous fluids. Specs: Hardwood
handle; Bristle pattern: 2 x 6; Bristle trim: 1/2"; Face: 7/8"W
x 3/8"L; 5-1/2" OAL. (USA)
