Tec-Cut Diagonal Cutters:

Tec-Cut Diagonal Cutters with Skinning Hole Tapered nose cutter with .052-skinning hole for 16 AWG. Electronically induction hardened cutting edge of 60 to 62 HRc. 5" OAL Techni-Tool Part No. 758PL002 6" OAL Techni-Tool Part No. 758PL219	Tec-Cut Heavy Duty Diagonal Cutters High leverage design provides increased cutting power. Hand honed cutting edges. Electronically induction hardened cutting edge of 60 to 62 HRc. 8" OAL Techni-Tool Part No. 758PL218
Tec-Cut Diagonal Side Cutter Heavy-duty diagonal side cutter. Insulated hardened hand-honed edges. 6" OAL. (USA) Techni-Tool Part No. 758PL004

Other Cutters:

Tec-Cut Long Nose with Side Cutter For cutting, bending, and looping wire. Electronically induction hardened cutting edge of 60 to 62 HRc. 6-5/8" OAL. Techni-Tool Part No. 758PL0016

Tec-Cut Slim Needle Nose Bent Slim design for limited access areas with 75° bent nose. Serrated jaws. (USA) Techni-Tool Part No. 758PL011

Pliers:

Tec-Cut Slip Joint Pliers Feature two-jaw position, shear type wire cutter, and double-dipped foam grips. Made from 1060-Carbon Steel and meet ANSI requirements. Hardness of 42-43 HRc. (USA) 5" OAL Techni-Tool Part No. 758PL206 6" OAL Techni-Tool Part No. 758PL207 8" OAL Techni-Tool Part No. 758PL208

Tec-Cut Utility Pliers Tongue and groove pliers adjust to wide range of jaw openings. Features: undercut channels and reinforced ribs for extra gripping power and strength. 4-position jaw, 5" OAL Techni-Tool Part No. 758PL209 5-position jaw, 7" OAL Techni-Tool Part No. 758PL210 6-position jaw, 10" OAL Techni-Tool Part No. 758PL211

Tec-Cut N.E. Style Lineman's Pliers Smooth stream-lined nose. Diamond serrated jaw for increased gripping strength. Electronically induction hardened cutting edge of 60 to 62 HRc. Specs: ANSI Specs: B107.20M. 9" OAL Techni-Tool Part No. 758PL214

Tec-Cut N.E. Style Lineman's Pliers with Crimp Die Crimp die for insulated & non-insulated terminals. 9" OAL Techni-Tool Part No. 758PL215

Techni-Tool Soft Jaw Pliers		Replacement Jaw Sleeves for 758PL035 (35Z16) Techni-Tool Part No. 758PL3516 Replacement Jaw Sleeves for 758PL0045 (45Z16) Techni-Tool Part No. 758PL4516
	Made from high carbon steel and heat treated for long life. Four-position pivot enables full range capacity from 3/4" to 2-1/2". Cushioned grips. (USA) Forged Steel (45Z) Techni-Tool Part No. 758PL0045

Tec-Cut Crimp Pliers

For installing insulated and/or non-insulated splices, disconnects and wire joints. The crimping die is marked for insulated and non-insulated solderless terminals and connectors. Wire cutter in tapered nose for work in tight areas. Accommodates wire: 10-22 AWG. 9-3/4" OAL.

Insulated and Non- Insulated Terminals
Techni-Tool Part No. 758PL033