Jensen Tools Jensen Tools

Jensen JTK-87RIM General Electronics Standard/Metric Tool Kit

  • Techni-Tool Part #: JTK-87RIM
  • Mfg Part #: JTK-87RIM
  • Sold per: EACH
  • noinfofound
  • noinfofound

Enter Amount $
  • Contains all the JTK-87 tools plus 25 metric tools on the bottom pallet. Features Jensen's Rugged Duty Poly Case. This case is vacuumed formed and olive in color. Spring loaded handle, combination lock, and 1/4" turn twist latches.

    Dimensions (ID) (L x W x D): 17-1/4 x 14-1/2 x 9"
    Case Style: Rugged Duty, Olive
    Case Style No.: 9
    Pallet Style: Side
    Weight (lbs.): 27


    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    MEN'S/WOMEN'S:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    STYLE:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TOE TYPE:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Kit Includes:
    07-3205D Top Side Hinge Pallet, Empty. # A. 17.75 x 14.5 "
    1 of 07-3205D Top Side Hinge Pallet, Empty. # A. 17.75 x 14.5 "
    1 of 1001026 687-002 JENSEN LABEL
    1 of 3055-1538/14-409 Feeler Gauge, 11 Blades
    1 of Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276
    1 of Aven 13.530/8608 ALIGNMENT TRIMPOT TOOL
    1 of Aven 44205 PK/5 #11 BLADE 44205
    1 of Barco 04404 Ball Peen Hammer, 4 oz.
    1 of Beau Tech SH20A "SH20A SoLDER AID REAMER/ FoRK 8"" BEAUTECH"
    1 of Beau Tech SH20K Stainless Steel Brush/Scraper
    1 of Eclipse ProsKit 900-123 Pocket Magnifier
    1 of Edsyn 423-000 DESOLDER PUMP JENSEN
    1 of Edsyn 424-340 Constant Temperature Soldering Iron 30W
    1 of Eklind 69291 Hex Key Inch Set, 10 pc.
    1 of Etcon CT102 Receptacle Tester
    1 of Flambeau 5126CL Parts Box with 17 Compartments, 7 x 4 x 1-1/16”
    1 of General 185B033 807U Slotted Ratchet Driver
    1 of General 185B412 807XU Phillips Ratchet Driver
    1 of General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO
    1 of General 311ME STEEL RULE GENERAL 311ME
    1 of General 83 SCRIBE GENERAL (83)
    1 of Grobet 37.793 #3 METAL FERRULED FILE H ANDLE 37.793
    1 of Grobet JEN-1 1MM PIN PUNCH GROBET
    1 of Grobet JEN-2 2MM PIN PUNCH
    1 of Grobet JEN-3 3MM PIN PUNCH
    1 of Grobet JEN5 3PC FILE SET JEN5 GROBET
    1 of Imperial 22R61 External Style Retaining Ring Pliers
    1 of Jensen Tools 07-00-003264 Bottom Pallet, Empty. 17.75 x 14.5"
    1 of Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter
    1 of Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long
    1 of Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long
    1 of Jensen Tools 1-006/ G270P-NP 7" Long Groove Joint Pliers with 1-1/8" Capacity
    1 of Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long
    1 of Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG
    1 of Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity
    1 of Jensen Tools 13.166 Silver Penlight (AAA Batteries)
    1 of Jensen Tools 1720 5" Straight Hemostats
    1 of Jensen Tools 175* Smooth Blade Electrician's Scissors 5-1/4" Long
    1 of Jensen Tools 18001 Light-Duty Precision Knife
    1 of Jensen Tools 21E Metric Stripper/Cutter/Crimper
    1 of Jensen Tools 3056-0002/14-407 Feeler Gauge, 13 Blades
    1 of Jensen Tools 356-058 Rugged Duty Case
    1 of Jensen Tools 36B901 HANDLE 4 1/8"
    1 of Jensen Tools 36B971 HEX BLADE, 1.27MM
    1 of Jensen Tools 36B972 HEX BLADE, 1.5MM
    1 of Jensen Tools 36B975 HEX BLADE, 3MM
    1 of Jensen Tools 36B976 HEX BLADE, 4MM
    1 of Jensen Tools 3B305 NUTDRIVER,3.5MM MINIATUR E
    1 of Jensen Tools 3B306 NUTDRIVER,3MM,MINIATURE
    1 of Jensen Tools 3B651 Nutdriver Blade, 4.0mm
    1 of Jensen Tools 3B653 Nutdriver Blade, 4.5mm
    1 of Jensen Tools 3B655 Nutdriver Blade, 5.0mm
    1 of Jensen Tools 3B657 Nutdriver Blade, 5.5mm
    1 of Jensen Tools 3B659 Nutdriver Blade, 6.0mm
    1 of Jensen Tools 3B661 Nutdriver Blade, 7.0mm
    1 of Jensen Tools 3B663 Nutdriver Blade, 8.0mm
    1 of Jensen Tools 3B665 Nutdriver Blade, 9.0mm
    1 of Jensen Tools 3B991 Nutdriver Blade, 11mm
    1 of Jensen Tools 3B994 Nutdriver Blade, 10mm
    1 of Jensen Tools 74701 Adjustable Wrench, 6", 1" Jaw Opening
    1 of Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style
    1 of Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style
    1 of Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style
    1 of Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style
    1 of Jensen Tools 9J66101J 1/8" Slotted Screwdriver - Pocket Clip Style
    1 of Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style
    1 of Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66166J 5/16" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style
    1 of Jensen Tools M3300 Stamped Steel Crimper/Stripper
    1 of Jensen Tools SIJ12-1980 9-Pocket Vinyl Pouch for Hex Blades
    1 of Jensen Tools TWZ-935.00-J Reverse-Action Tweezer
    1 of Jonard Tools AT-6241 Non Conductive Alignment Tool 7"
    1 of Jonard Tools M-130/SX 8" Push-Pull Spring Tool
    1 of Jonard Tools OB-1/3 BURNISHER FILES PKG/3 JONARD OB1
    1 of Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701
    1 of Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703
    1 of Mayhew 24303-949 Center Punch
    1 of Moody 58-0114 SCREWDRIVER SET MOODY TOOLS 58-0114
    1 of OK Industries EX1 DIP Extractor for 8 to 24 pin narrow chips
    1 of Proto j4974/21171 Small Metric Set
    1 of S-2630 CARDBOARD INSERT FOR TOOL KITS
    1 of Stanley 33-215 Powerlock Tape, 12'/3.5m
    1 of Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2"
    1 of Ullman D-3 Slotted Screwstarter, 9"
    1 of Ullman PD11-B Phillips Aluminum Screwstarter, 9"
    1 of Vise Grip 5WR 5" Curved Jaw Locking Pliers with Cutter
    1 of Xcelite 36-997 HEX BLADE 7/64"
    1 of Xcelite 36B906 NUTDRIVER BLADE 3/16
    1 of Xcelite 36B907 NUTDRIVER BLADE 7/32"
    1 of Xcelite 36B908 NUTDRIVER BLADE 1/4"
    1 of Xcelite 36B909 NUTDRIVER BLADE 9/32"
    1 of Xcelite 36B910 NUTDRIVER BLADE 5/16"
    1 of Xcelite 36B911 NUTDRIVER BLADE 11/32"
    1 of Xcelite 36B912 NUTDRIVER BLADE 3/8"
    1 of Xcelite 36B914 NUTDRIVER BLADE 7/16"
    1 of Xcelite 36B916 NUTDRIVER BLADE 1/2"
    1 of Xcelite 36B920 HEX BLADE .050"
    1 of Xcelite 36B921 HEX BLADE 1/16"
    1 of Xcelite 36B922 HEX BLADE 5/64"
    1 of Xcelite 36B923 HEX BLADE 3/32"
    1 of Xcelite 36B924 HEX BLADE 1/8"
    1 of Xcelite 36B925 HEX BLADE 5/32"
    1 of Xcelite 36B926 HEX BLADE 3/16"
    1 of Xcelite 36B973 HEX BLADE, 2MM
    1 of Xcelite 36B974 HEX BLADE, 2.5MM
    1 of Xcelite 36B977 HEX BLADE,5MM
    1 of Xcelite 36B994 HEX BLADE 9/64"
    1 of Xcelite 994 T Style Handle, 1 x 3-3/8
    3055-1538/14-409 Feeler Gauge, 11 Blades
    Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276
    Aven 13.530/8608 ALIGNMENT TRIMPOT TOOL
    Aven 44205 PK/5 #11 BLADE 44205
    Barco 04404 Ball Peen Hammer, 4 oz.
    Beau Tech SH20A "SH20A SoLDER AID REAMER/ FoRK 8"" BEAUTECH"
    Beau Tech SH20K Stainless Steel Brush/Scraper
    Eclipse ProsKit 900-123 Pocket Magnifier
    Edsyn 423-000 DESOLDER PUMP JENSEN
    Edsyn 424-340 Constant Temperature Soldering Iron 30W
    Eklind 69291 Hex Key Inch Set, 10 pc.
    Etcon CT102 Receptacle Tester
    Flambeau 5126CL Parts Box with 17 Compartments, 7 x 4 x 1-1/16”
    General 185B033 807U Slotted Ratchet Driver
    General 185B412 807XU Phillips Ratchet Driver
    General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO
    General 311ME STEEL RULE GENERAL 311ME
    General 83 SCRIBE GENERAL (83)
    Grobet 37.793 #3 METAL FERRULED FILE H ANDLE 37.793
    Grobet JEN-1 1MM PIN PUNCH GROBET
    Grobet JEN-2 2MM PIN PUNCH
    Grobet JEN-3 3MM PIN PUNCH
    Grobet JEN5 3PC FILE SET JEN5 GROBET
    Imperial 22R61 External Style Retaining Ring Pliers
    Jensen Tools 07-00-003264 Bottom Pallet, Empty. 17.75 x 14.5"
    Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter
    Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long
    Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long
    Jensen Tools 1-006/ G270P-NP 7" Long Groove Joint Pliers with 1-1/8" Capacity
    Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long
    Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG
    Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity
    Jensen Tools 13.166 Silver Penlight (AAA Batteries)
    Jensen Tools 1720 5" Straight Hemostats
    Jensen Tools 175* Smooth Blade Electrician's Scissors 5-1/4" Long
    Jensen Tools 18001 Light-Duty Precision Knife
    Jensen Tools 21E Metric Stripper/Cutter/Crimper
    Jensen Tools 3056-0002/14-407 Feeler Gauge, 13 Blades
    Jensen Tools 36B901 HANDLE 4 1/8"
    Jensen Tools 36B971 HEX BLADE, 1.27MM
    Jensen Tools 36B972 HEX BLADE, 1.5MM
    Jensen Tools 36B975 HEX BLADE, 3MM
    Jensen Tools 36B976 HEX BLADE, 4MM
    Jensen Tools 3B306 NUTDRIVER,3MM,MINIATURE
    Jensen Tools 3B651 Nutdriver Blade, 4.0mm
    Jensen Tools 3B653 Nutdriver Blade, 4.5mm
    Jensen Tools 3B655 Nutdriver Blade, 5.0mm
    Jensen Tools 3B657 Nutdriver Blade, 5.5mm
    Jensen Tools 3B659 Nutdriver Blade, 6.0mm
    Jensen Tools 3B661 Nutdriver Blade, 7.0mm
    Jensen Tools 3B663 Nutdriver Blade, 8.0mm
    Jensen Tools 3B665 Nutdriver Blade, 9.0mm
    Jensen Tools 3B991 Nutdriver Blade, 11mm
    Jensen Tools 3B994 Nutdriver Blade, 10mm
    Jensen Tools 74701 Adjustable Wrench, 6", 1" Jaw Opening
    Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style
    Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style
    Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style
    Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style
    Jensen Tools 9J66101J 1/8" Slotted Screwdriver - Pocket Clip Style
    Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style
    Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style
    Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style
    Jensen Tools 9J66166J 5/16" Slotted Scewdriver - Regular Style
    Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style
    Jensen Tools M3300 Stamped Steel Crimper/Stripper
    Jensen Tools SIJ12-1980 9-Pocket Vinyl Pouch for Hex Blades
    Jensen Tools TWZ-935.00-J Reverse-Action Tweezer
    Jonard Tools AT-6241 Non Conductive Alignment Tool 7"
    Jonard Tools M-130/SX 8" Push-Pull Spring Tool
    Jonard Tools OB-1/3 BURNISHER FILES PKG/3 JONARD OB1
    Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701
    Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703
    Mayhew 24303-949 Center Punch
    Moody 58-0114 SCREWDRIVER SET MOODY TOOLS 58-0114
    OK Industries EX1 DIP Extractor for 8 to 24 pin narrow chips
    Proto j4974/21171 Small Metric Set
    Stanley 33-215 Powerlock Tape, 12'/3.5m
    Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2"
    Ullman D-3 Slotted Screwstarter, 9"
    Ullman PD11-B Phillips Aluminum Screwstarter, 9"
    Vise Grip 5WR 5" Curved Jaw Locking Pliers with Cutter
    Xcelite 36-997 HEX BLADE 7/64"
    Xcelite 36B906 NUTDRIVER BLADE 3/16
    Xcelite 36B907 NUTDRIVER BLADE 7/32"
    Xcelite 36B908 NUTDRIVER BLADE 1/4"
    Xcelite 36B909 NUTDRIVER BLADE 9/32"
    Xcelite 36B910 NUTDRIVER BLADE 5/16"
    Xcelite 36B911 NUTDRIVER BLADE 11/32"
    Xcelite 36B912 NUTDRIVER BLADE 3/8"
    Xcelite 36B914 NUTDRIVER BLADE 7/16"
    Xcelite 36B916 NUTDRIVER BLADE 1/2"
    Xcelite 36B920 HEX BLADE .050"
    Xcelite 36B921 HEX BLADE 1/16"
    Xcelite 36B922 HEX BLADE 5/64"
    Xcelite 36B923 HEX BLADE 3/32"
    Xcelite 36B924 HEX BLADE 1/8"
    Xcelite 36B925 HEX BLADE 5/32"
    Xcelite 36B926 HEX BLADE 3/16"
    Xcelite 36B973 HEX BLADE, 2MM
    Xcelite 36B974 HEX BLADE, 2.5MM
    Xcelite 36B977 HEX BLADE,5MM
    Xcelite 36B994 HEX BLADE 9/64"
    Xcelite 994 T Style Handle, 1 x 3-3/8
  • noinfofound