Jensen Tools Jensen Tools

Jensen JTK-17TTD Electro Mechanical Repair Tool Kit

  • Techni-Tool Part #: JTK-17TTD
  • Mfg Part #: JTK-17TTD
  • Sold per: EACH
  • noinfofound
  • noinfofound

Enter Amount $
  • The JTK-17TTD contains the Jensen JTK-17 tool set and over 100 of the most commonly tools used in the electronics industry. The mobile case has a horizontal design, keeping the tools in place.

    Dimensions (ID) (L x W x D): 17-3/4 x 14-1/2 x 12"
    Case Style: Horizontal Tough "Tote"
    Case Style No.: 12
    Pallet Style: Side Hinge
    Weight (lbs.): 24


    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    MEN'S/WOMEN'S:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    STYLE:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TOE TYPE:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Kit Includes:
    Over 100 tools are included in the JTK-17 Tool Kit
    Alignment tools (2)
    Feeler gauge
    Hammer, ball peen, 4 oz.
    Handle, driver blades (2): 3-1/8, 4-1/8"
    Hex key set 10 pcs, .028-5/32"
    Hex key set (7): Fold up 2, 2.5, 3, 4, 5, 6, 8mm
    Hexdriver blades (9): .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16"
    Icepick scribe
    Knife, electrician's
    Mirror, inspection
    Nutdriver blades (9): 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"
    Penlight
    Pliers (6): diagonal cutter, 4-1/4"; diagonal cutter, 5-1/4"; groove joint, 10"; long nose, 4-3/4"; long nose with cutter, 6-3/4"; retaining ring, external/internal
    Punch, center, 3/32"
    Punch, Pin (2): 1/16, 1/8"
    Rule, stainless, 6"
    Screwdriver, offset ratchet, Phillips/slotted
    Screwdriver, Phillips No.0 x 21/2", pocket clip
    Screwdriver, Phillips (3): No.1 x 3"; No.2 x 11/4"; No.2 x 4"Kit Includes:
    07-2945D Top Side Hinge Pallet #D, Empty. 17.75 x 14.5"
    1 of 07-2945D Top Side Hinge Pallet #D, Empty. 17.75 x 14.5"
    1 of 160B050 SCRATCH AWL 8" JENSEN BRANDED
    1 of 3055-1538/14-409 Feeler Gauge, 11 Blades
    1 of Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276
    1 of Barco 04404 Ball Peen Hammer, 4 oz.
    1 of Beau Tech SH20KF Stainless Steel Brush/Fork
    1 of Edsyn 424-340 Constant Temperature Soldering Iron 30W
    1 of Eklind 69291 Hex Key Inch Set, 10 pc.
    1 of General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO
    1 of Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter
    1 of Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long
    1 of Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long
    1 of Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long
    1 of Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG
    1 of Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity
    1 of Jensen Tools 12R61 Internal/External Styles Retaining Ring Pliers 6" Long
    1 of Jensen Tools 13.166 Silver Penlight (AAA Batteries)
    1 of Jensen Tools 185B035 807SXU Slotted/Phillips Ratchet Driver
    1 of Jensen Tools 2900/JEN Electrician's Knife/Driver
    1 of Jensen Tools 2B1714R-002/356-412 Horizontal Tough "Tote" Case, 12" Deep
    1 of Jensen Tools 36B901 HANDLE 4 1/8"
    1 of Jensen Tools 36B902 HANDLE 3 1/8"
    1 of Jensen Tools 501S W/BOX 14-pc. 1/4" Drive Inch Socket Set
    1 of Jensen Tools 74700 Adjustable Wrench, 4", 11/16" Jaw Opening
    1 of Jensen Tools 74702 Adjustable Wrench, 8", 1-3/16" Jaw Opening
    1 of Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style
    1 of Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style
    1 of Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style
    1 of Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style
    1 of Jensen Tools 9J66102J 3/32" Slotted Screwdriver - Pocket Clip Style
    1 of Jensen Tools 9J66114J 1/8" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style
    1 of Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style
    1 of Jensen Tools 9J66166J 5/16" Slotted Scewdriver - Regular Style
    1 of Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style
    1 of Jensen Tools M3300 Stamped Steel Crimper/Stripper
    1 of Jensen Tools TWZ-935.00-J Reverse-Action Tweezer
    1 of Jensen Tools V18J Midget Open End Wrench Set, Inch, 8pc.
    1 of Jensen Tools X6724JT All-Purpose Canvas Storage Bag with Zipper, 9" x 15"
    1 of Jonard Tools AT-6241 Non Conductive Alignment Tool 7"
    1 of Jonard Tools M-130/SX 8" Push-Pull Spring Tool
    1 of Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701
    1 of Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703
    1 of Mayhew 24303-949 Center Punch
    1 of Moody 55-0208 Jeweler's Screwdriver Set, 7 pc.
    1 of Proto j4974/21171 Small Metric Set
    1 of Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2"
    1 of Ullman DE-1 Double-Ended Nylon Screw Starter, 9"
    1 of Xcelite 36-997 HEX BLADE 7/64"
    1 of Xcelite 36B906 NUTDRIVER BLADE 3/16
    1 of Xcelite 36B907 NUTDRIVER BLADE 7/32"
    1 of Xcelite 36B908 NUTDRIVER BLADE 1/4"
    1 of Xcelite 36B909 NUTDRIVER BLADE 9/32"
    1 of Xcelite 36B910 NUTDRIVER BLADE 5/16"
    1 of Xcelite 36B911 NUTDRIVER BLADE 11/32"
    1 of Xcelite 36B912 NUTDRIVER BLADE 3/8"
    1 of Xcelite 36B914 NUTDRIVER BLADE 7/16"
    1 of Xcelite 36B916 NUTDRIVER BLADE 1/2"
    1 of Xcelite 36B920 HEX BLADE .050"
    1 of Xcelite 36B921 HEX BLADE 1/16"
    1 of Xcelite 36B922 HEX BLADE 5/64"
    1 of Xcelite 36B923 HEX BLADE 3/32"
    1 of Xcelite 36B924 HEX BLADE 1/8"
    1 of Xcelite 36B925 HEX BLADE 5/32"
    1 of Xcelite 36B926 HEX BLADE 3/16"
    1 of Xcelite 36B994 HEX BLADE 9/64"
    160B050 SCRATCH AWL 8" JENSEN BRANDED
    3055-1538/14-409 Feeler Gauge, 11 Blades
    Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276
    Barco 04404 Ball Peen Hammer, 4 oz.
    Beau Tech SH20KF Stainless Steel Brush/Fork
    Edsyn 424-340 Constant Temperature Soldering Iron 30W
    Eklind 69291 Hex Key Inch Set, 10 pc.
    General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO
    Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter
    Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long
    Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long
    Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long
    Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG
    Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity
    Jensen Tools 12R61 Internal/External Styles Retaining Ring Pliers 6" Long
    Jensen Tools 13.166 Silver Penlight (AAA Batteries)
    Jensen Tools 185B035 807SXU Slotted/Phillips Ratchet Driver
    Jensen Tools 2900/JEN Electrician's Knife/Driver
    Jensen Tools 36B901 HANDLE 4 1/8"
    Jensen Tools 36B902 HANDLE 3 1/8"
    Jensen Tools 501S W/BOX 14-pc. 1/4" Drive Inch Socket Set
    Jensen Tools 74700 Adjustable Wrench, 4", 11/16" Jaw Opening
    Jensen Tools 74702 Adjustable Wrench, 8", 1-3/16" Jaw Opening
    Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style
    Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style
    Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style
    Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style
    Jensen Tools 9J66102J 3/32" Slotted Screwdriver - Pocket Clip Style
    Jensen Tools 9J66114J 1/8" Slotted Screwdriver - Regular Style
    Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style
    Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style
    Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style
    Jensen Tools 9J66166J 5/16" Slotted Scewdriver - Regular Style
    Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style
    Jensen Tools M3300 Stamped Steel Crimper/Stripper
    Jensen Tools TWZ-935.00-J Reverse-Action Tweezer
    Jensen Tools V18J Midget Open End Wrench Set, Inch, 8pc.
    Jensen Tools X6724JT All-Purpose Canvas Storage Bag with Zipper, 9" x 15"
    Jonard Tools AT-6241 Non Conductive Alignment Tool 7"
    Jonard Tools M-130/SX 8" Push-Pull Spring Tool
    Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701
    Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703
    Mayhew 24303-949 Center Punch
    Moody 55-0208 Jeweler's Screwdriver Set, 7 pc.
    Proto j4974/21171 Small Metric Set
    Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2"
    Ullman DE-1 Double-Ended Nylon Screw Starter, 9"
    Xcelite 36-997 HEX BLADE 7/64"
    Xcelite 36B906 NUTDRIVER BLADE 3/16
    Xcelite 36B907 NUTDRIVER BLADE 7/32"
    Xcelite 36B908 NUTDRIVER BLADE 1/4"
    Xcelite 36B909 NUTDRIVER BLADE 9/32"
    Xcelite 36B910 NUTDRIVER BLADE 5/16"
    Xcelite 36B911 NUTDRIVER BLADE 11/32"
    Xcelite 36B912 NUTDRIVER BLADE 3/8"
    Xcelite 36B914 NUTDRIVER BLADE 7/16"
    Xcelite 36B916 NUTDRIVER BLADE 1/2"
    Xcelite 36B920 HEX BLADE .050"
    Xcelite 36B921 HEX BLADE 1/16"
    Xcelite 36B922 HEX BLADE 5/64"
    Xcelite 36B923 HEX BLADE 3/32"
    Xcelite 36B924 HEX BLADE 1/8"
    Xcelite 36B925 HEX BLADE 5/32"
    Xcelite 36B926 HEX BLADE 3/16"
    Xcelite 36B994 HEX BLADE 9/64" Screwdriver, slotted 3/32 x 2", pocket clip
    Screwdriver, slotted (6): 1/8 x 4"; 1/8 x 8"; 3/16 x 3"; 1/4 x 11/4"; 1/4 x 4"; 5/16 x 6"
    Screwdriver set, jeweler's, 7 pc.
    Screwstarter, Phillips/slotted
    Socket set, 1/4" drive, 14 pc.
    Solder aid, fork and hook
    Soldering iron, 115V
    Spring tool, pull
    Spring tool, push
    Tweezer, reverse action
    Wire crimper/stripper
    Wire stripper/cutter
    Wrench, adjustable (2): 4"; 8"
    Wrench set, ignition, 8 pc.
    Tool case with pallets
  • noinfofound