More Options, More Power!

FREE ASG POWER SUPPLY with purchase of a TL, A, CL, BLG, or SS Series Driver!


Purchase any of the following drivers before December 31, 2019 and RECEIVE A FREE CORRESPONDING POWER SOURCE!


PS-55 Single Power Source
Switchable 2-speed output for precision low voltage electric drivers. Delivers over 30 VDC on high setting - extra when needed. Standard clutch signal output can be used with counters or programmable logic controller to monitor driver. Circuit breaker protected. Can be used with either 110 or 220 VAC input via external switch.


CLT-60 Single Power Source
Fused input voltage with circuit breaker protected output. Switchable output voltage gives two-speed option on drivers.


CLT-80 Single Tool Control Power Supply
Switchable output voltage provides two-speed option for use with BL-Series drivers. 110-240 VAC.


T-70 BL-Series Power Pack
For BL-Series drivers. Switchable output voltage provides two-speed option for drivers. 110/240 VDC (Input), 21-31 VDC (Output).



TL-Series Precision Torque DC Drivers

• Automatically stops when pre-set torque is reached
• Balanced ergonomic design
• Exceptionally lightweight - 11.5 oz.
• Reduced vibration and noise
• Low voltage DC operator
• Double insulated

TT No. Model Torque Drive Size RPM
on High
RPM
on Low
FREE
Power Supply
106SC5605 TL-6500 1.5-17 lbf/in 1/4" Hex 700 500 PS-55
106SC5606 TL-6500ESD 1.5-17 lbf/in 1/4" Hex 700 500
106SC5601 TL-3000 .25-4.0 lbf/in 1/4" Hex 1000 700
106SC5602 TL-3000 .25-4.0 lbf/in 4.0mm 1000 700
106SC5603 TL-3000ESD .25-4.0 lbf/in 1/4" Hex 1000 700
106SC5604 TL-3000ESD .25-4.0 lbf/in 4.0mm 1000 700


BL-Series Brushless Drivers

• Brushless motor with magnetic switches extends driver life
• For high production environments
• Compact design, lightweight
• No mechanical switches to wear out
• Precise torque control: driver automatically stops when pre-set torque is reached to eliminate over- or -under-tightening
• All metal gears

TT No. Model Torque Approx.
RPM
Drive Size FREE
Power Supply
106SC4271 BL-5000 2-11 lbf/in 1000 4.0mm PS-55
106IN4275 BL-5000 2-11 lbf/in 1000 1/4" Hex
106SC5500 BL-5000-ESD  2-11 lbf/in 1000 4.0mm
106SC5501 BL-5000-ESD 2-11 lbf/in 1000 1/4" Hex
106SC5505 BL-7000 5-21 lbf/in 1050 5.0mm T-70 BL
106SC5504 BL-7000 6.1-24 lbf/in 1050 1/4" Hex
106SC5506 BL-7000HT 6.1-30 lbf/in 740 1/4" Hex

BLG-Series

Designed for medium to light torque applications
• Carbon dust is eliminated; great for cleanroom assembly requirements
• Anti-static plastic body is ideal for delicate assembly situations
• Excellent flexibility for small fasteners or vacuum pick-up applications

TT No. Model Torque Approx.
RPM
Drive Size FREE
Power Supply
106IE5561 BLG-4000 .4 - 4.8 lbf/in 1000 4.0mm PS-55
106IE5560 BLG-4000X .4 - 4.8 lbf/in 1000 1/4" Hex
106IE655 BLG-4000X-BC1 .9 - 4.8 lbf/in 1000 1/4" Hex
106IE563 BLG-5000 1.7 - 10 lbf/in 1000 4.0mm
106IE583 BLG-5000-BC1 1.7 – 10 lbf/in 1000 1/4" Hex
106IE5562 BLG-5000X 1.7 – 10 lbf/in 1000 1/4" Hex
106IE569 BLG-5000X-HT 4.4-17.7 lbf/in 730 1/4" Hex T-70 BL
106IE588 BLG-5000X-BC1-HT 4.4-17.7 lbf/in 730 1/4" Hex

A-Series Torque Drivers

For standard to medium torque applications using #1 to #10 screws (2.0 mm to 5.0 mm).

• Feature a rare-earth magnet motor for more power.
Provide considerably higher RPM ranges and torque ranges than corresponding CL-Series tools.

TT No. Model Torque Approx. RPM @30VDC Approx. RPM @20VDC Drive Size FREE
Power Supply
106SC4113 A-4500 3.5-7.0 lbf/in 1400 1200 1/4" Hex PS-55
106SC281 A-5000 2.0-11 lbf/in 970 700 1/4" Hex
106SC224 A-6500 4.5-16 lbf/in 1400 -- 1/4" Hex CLT-60


CL-Series High Performance Drivers*

Designed for production environments where torque repeatability is a must to maintain quality standards

• Recommended wherever cleanroom assembly or static control is an issue
• Intended for vertical insertion of fasteners
• Torques are adjusted externally; tamper-proof torques are available
• Drivers available in Small, Medium, Standard & Large Sizes

TT No. Model Torque Approx RPM
@30VDC
Approx RPM
@20VDC
Size FREE
Power Supply
106SC107 CL-2000 2.7-27 ozf/in 680 490 4.0mm PS-55
106SC4109 CL-3000 3-25 ozf/in 1000 670 4.0mm
106SC111 CL-4000 .5-4.5 lbf/in 1000 670 4.0mm
106SC641 CL-4000 .5-4.5 lbf/in 1000 670 1/4" Hex
106SC121 CL-6500 1.2-14 lbf/in 910 600 1/4" Hex
106SC120 CL-6500-PS 1.2-14 lbf/in 910 600 1/4" Hex
106SC124 CL-7000 2.6-24 lbf/in 750 500 1/4" Hex CLT-60
106SC125 CL-7000-PS 2.6-24 lbf/in. 750 500 1/4" Hex


SS-Series Shock Absorbing/Soft Stop Tools

• Same as CL tools but with extra shock absorbing features
• Ideal for use on impact-sensitive equipment
• Reduces impacts by approximately 80% when fastening

TT No. Model Torque Approx. RPM Drive Size FREE
Power Supply
106SC285 SS-3000 .26-1.74 lbf/in 1000 4.0 mm PS-55
106SC287 SS-4000 .9-4.0 lbf/in 1000 1/4" hex
106SC286 SS-4000 .9-4.0 lbf/in 1000 4.0mm
106SC134 SS-6500 2.2-11.0 lbf/in 900 1/4" hex
106SC277 SS-3000-ESD .26-1.74 lbf/in 1000 4.0 mm
106SC278 SS-4000-ESD .9-4.0 lbf/in 1000 1/4" hex
106SC279 SS-4000-ESD .9-4.0 lbf/in 1000 4.0mm
106SC288 SS-6500-ESD 2.2-11.0 lbf/in 900 1/4" hex
106SC136 SS-7000 2.6-17.5 lbf/in 750 1/4" hex CLT-60
106SC289 SS-7000-ESD 2.6-17.5 lbf/in 750 1/4" hex

OFFER EXTENDED THROUGH December 31, 2019 - ORDER TODAY!