Hakko
Hakko Preheater Board Benchtop 1200W FR-1012

  • Techni-Tool Part #: 821SO1012
  • Mfg Part #: FR1012B-01
  • Sold per: EACH
  • Estimated weight: 16 lb
Enter Amount $
 

This item has been added to your favorites

You must be logged in to add an item to your favorites, click here to login.
New customer? Click here to register.

Please select a value for each option before adding to your Favorites.

Close

  • Benchtop board heater designed to elevate the temperature of PCB assemblies so components can be soldered more easily, and with improved results. Useful on medium to high-mass board assemblies, which can heat sink a significant amount of energy from a soldering iron tip, or handheld hot air tool. Ideal when soldering lead-free assemblies. Operates in either Power Mode or T/C (thermocouple) Mode.

    Power mode allows you to set the output of the unit manually and will output the set percentage of power regardless of the T/C actual value. Thermocouple not required, but may be used to monitor the actual board temperature.

    T/C mode allows you to set the desired temperature (50-180°C/122-356°F) of the PCB for closed-loop control of the temperature. A Type-K thermocouple must be secured to the PCB and plugged into the unit's T/C jack. When running, the unit will apply 100% power until the board reaches 10°C below the set temperature. The unit will then start PID control to regulate the power output of the heater to hold the PCB at the set temperature.Switchable 4-zone heating array with 2 minute auto power off setting.

    Includes: Preheater; infrared heater lamp, 500W; Type K 36 Ga. thermocouple.

    Specifications

    Board capacity: 12" x 15"
    Heated Area: 10" x 12"
    Heater Watts: 1,200W
    Heater type: Low mass quartz I/R
    Controller: Microprocessor

  • Specifications:
    • Board capacity: 12" x 15"
    • Heated Area: 10" x 12"
    • Heater Watts: 1,200W
    • Heater type: Low mass quartz I/R
    • Controller: Microprocessor