Simco/Ion Systems Inc. Simco/Ion Systems Inc.

Simco Ion Periodic Electrostat Verification System, 775PVS

  • Techni-Tool Part #: 709ST9175
  • Mfg Part #: 91-0775PVS
  • Sold per: EACH
  • Estimated weight: 1 lb
  • noinfofound
  • noinfofound

Enter Amount $
  • A hand-held alternative to charged plate monitors. Versatile verification system consists of three components – a fieldmeter, a detachable plate, and a charger – to measure static charge. With the charger and plate attached, the system can be used to verify ionizer operation and check ion balance and discharge times. Used by itself, the fieldmeter can measure electrostatic fields on any surface. Ranging lights ensure accurate and repeatable measurements by enabling you to determine the exact distance at which the voltage reading is correct. A SAMPLE/HOLD function allows measurements in hard to reach locations. For increased accuracy, connect the included flexible ground cord to a solid ground during operation. Features an easy-to-read, 3-1/2 digit display, chopper circuit and NIST-traceable calibration. Measurements correspond to those made by a charged plate monitor following Ionization Standard ANSI EOS/ESD S3.1-2006. CE certified.
    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GLOVE MATERIAL:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Input: 9 VDC alkaline battery, included

    Display: 3-1/2 digits, 0.4” digit height

    Output: Analog output through miniature jack, 1V corresponds to 10kV

    Response: 5Hz at analog output, display updates 3x per second

    Range: ±0.00 to 19.99 kV @ 1”; higher voltages at distance >1”.

    Accuracy: ±5% chopper stabilized, least significant digit of display indicates tens of volts

    Controls: ON/OFF pushbutton, SAMPLE/HOLD pushbutton, ZERO control

  • noinfofound