MBT-250SDPT SMT/Thru-Hole Repair System The MBT250SDPT provides you with an advanced, microprocessor-based Thermal SMT & Repair Management Center which powers and controls three SensaTemp handpieces simultaneously for safe, rapid installation and removal of surface mount and thru-hole components.
Features Include: Auto tip temperature offset compensation system to set and display true tip temperatures - Rapid Temperature Recovery; Setback automatically reduces tip temperature to 350 degrees F/177 degrees C after 10-90 min. Manual mode allows you to put all channels into Setback; "Auto Off" Power Down feature turns off power to all three channels 90 minutes after all active channels have entered Setback mode, eliminating the possibility of leaving the unit on overnight. High Power, 3 Channel System - 185 watts total power. Independently powered; Tip & Temperature Selection System Charts - Makes choosing the right tip and temperature easy; Digital Readout - Displays the channels' temperature, error codes and programming status - Handles are static dissipative for ESD safety. F degrees/C degrees Selector Key - Displays set and operating temperature in either Fahrenheit or Centigrade; Keyboard Entry Microprocessor Control - All system settings are entered on a "user-friendly" array of keys with audible feedback. SensaTemp Closed -Loop Temperature Management. Controlled PRESSURE Port - controlled air flow for ThermoJet handpiece; AUTO SNAP-VAC Port - Quick-rise vacuum (10" Hg at tip within 150m) for high-performance soldering and desoldering; Key/Lock Option - Prevents unauthorized re-calibration or alteration of temp settings Minimum vacuum on-time reduces tip maintenance; Tip and Tool Stand Include integrated tip holders and water well/sponge system.