GW Instek GW Instek

Instek AFG-2105 Arbitrary Function Generator, 0.1Hz to 5MHz

  • Techni-Tool Part #: 471TE2105
  • Mfg Part #: AFG-2105
  • Sold per: EACH
  • noinfofound
  • noinfofound

Enter Amount $
  • The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields. The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.

    The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.


    Features:
    • · 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution
    • · Sine, Square, Triangular, Noise and Arbitrary Waveform
    • · 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform
    • · 1% ~ 99% adjustable duty cycle for Square Waveform
    • · Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
    • · Amplitude, DC Offset & Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
    • · AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)
    • · USB Device Interface for Remote Control and Waveform Editing
    • · PC Arbitrary Waveform Editing Software

    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    MEN'S/WOMEN'S:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    STYLE:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TOE TYPE:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Waveforms: Sine, Square, Ramp, Noise, Arbitrary Waveform
    Arbitrary Waveform:
    Sample Rate: 20 MSa/s
    Repetition Rate: 10MHz
    Waveform Length: 4k points
    Amplitude Resolution: 10 bit
    Non-Volatile Memory: 4k points

    Frequency Characteristics:
    Range: Sine, Square - 0.1Hz|5MHz
    Ramp: 0.1Hz ~ 1MHz
    Resolution: Sine, Square, Ramp: 0.1Hz
    Accuracy: Stability: ±20 ppm
    Aging: ±1 ppm, per 1 year
    Tolerance: ≦ 1 mHz

    Output Characteristics:
    Amplitude:
    Range:
    1 mVpp to 10 Vpp( into 50Ω), 0.1Hz~20MHz
    2 mVpp to 20 Vpp(open-circuit) , 0.1Hz~20MHz
    1 mVpp to 5 Vpp( into 50Ω), 20MHz~25MHz
    2 mVpp to 10 Vpp(open-circuit), 20MHz~25MHz
    Accuracy: ± 2% of setting ±1 mVpp (at 1 kHz,>10 mVpp)
    Resolution: 1 mV or 3 digits
    Flatness:
    ± 1% (0.1dB) ≦100kHz
    ± 3% (0.3 dB) ≦5MHz
    ± 4% (0.4 dB) ≦12MHz
    ± 20% (2 dB) ≦20MHz
    ± 5% (0.4 dB) ≦25MHz
    (sine wave relative to 1 kHz)
    Units:Vpp, Vrms, dBm

    Offset:
    Range:
    ±5 Vpk ac +dc (into 50Ω)
    ±10Vpk ac +dc (Open circuit)
    ±2.5 Vpk ac +dc (into 50Ω) for 20MHz-25MHz
    ±5Vpk ac +dc (Open circuit) for 20MHz-25MHz

    Accuracy: 2% of setting + 5 mV+ 0.5% of amplitude

    Output:
    Impedance: 50Ω typical (fixed) > 300kΩ (output disabled)
    Protection (main output): Short-circuit protected by overload relay automatically disables output

    SYNC Output:
    Level: TTL-compatible into>1kΩ
    Impedance: 50Ω nominal
    Rise or Fall Time: ≦25ns

    Sine Wave Characteristics:
    Harmonic Distortion:
    –55 dBc DC ~ 200kHz, Ampl > 0.1Vpp
    –50 dBc 200kHz ~ 1MHz, Ampl > 0.1Vpp
    –35 dBc 1MHz ~ 5MHz, Ampl > 0.1Vpp
    –30 dBc 5MHz ~ 25MHz, Ampl > 0.1Vpp

    Square Wave Characteristics:
    Rise/Fall Time: ≦25ns at maximum output (into 50Ωload)
    Overshoot: < 5%
    Asymmetry: 1% of period+1 ns
    Variable Duty Cycle:
    1.0% to 99.0% ≦ 100kHz
    20.0% to 80.0% ≦ 5 MHz
    40.0% to 60.0% ≦10MHz 50% ≦ 25MHz

    Ramp Characteristics:
    Linearity: < 0.1% of peak output
    Variable Symmetry: 0% to 100%(0.1% Resolution)

    AM Modulation:
    Carrier Waveforms: Sine, Square, Triangle
    Modulating Waveforms: Sine, Square, Triangle

    Modulating Frequency:
    2 mHz to 20 kHz (Int)
    DC to 20KHz (Ext)

    Depth: 0% to 120.0%
    Source: Internal / External

    FM Modulation:
    Carrier Waveforms:Sine, Square, Triangle
    Modulating Waveforms:Sine, Square, Triangle

    Modulating Frequency:
    2 mHz to 20 kHz (Int)
    DC to 20KHz (Ext)

    Deviation: DC to Max Frequency
    Source: Internal / External

    SWEEP:
    Waveforms: Sine, Square, Triangle
    Type: Linear or Logarithmic
    Start F / Stop F: 0.1Hz to Max Frequency
    Sweep Time: 1 ms to 500 s
    Source:- Internal / External

    FSK:
    Carrier Waveforms: Sine, Square, Triangle
    Modulating Waveforms: 50% duty cycle square

    Modulation Rate:
    2mHz to 100kHz(INT)
    DC to 100kHz(Ext)

    Frequency Range: 0.1Hz to Max Frequency
    Source: Internal / External

    Frequency Counter:
    Range: 5Hz to 150MHz
    Accuracy: Time Base accuracy±1count
    Time base: ±20ppm (23℃ ± 5℃) after 30 minutes warm up
    Resolution: 100nHz for 1Hz, 0.1Hz for 100MHz.
    Input Impedance: 1kΩ/1pf
    Sensitivity: 35mVrms ~ 30Vms (5Hz to 150MHz)

    System Characteristics:
    Store/Recall: 10 Groups of Setting Memories
    Interface: USB(Device)
    Display: LCD

    General Specifications:
    Power Source: AC100~240V , 50~60Hz
    Power Consumption: 25 VA
    Operating Environment:Temperature to satisfy the specification : 18 ~ 28°C
    Operating temperature : 0 ~ 40°C
    Relative Humidity:
    ≤ 80%, 0 ~ 40°C
    ≤ 70%, 35 ~ 40°C
    Installation category: CAT Ⅱ
    Operating Altitude: 2000 meters
    Storage Temperature: -10 ~ 70°C, Humidity: ≤70%
    Dimensions (WxHxD): 266(W)×107(H)×293(D) mm
    Weight: Approx. 2.5 kg
    Accessories: CD (user manual + software) ×1 , Quick Start Guide x1, Power cord×1
    GTL-101× 2

  • noinfofound