Fluke Fluke

Fluke i200 Current Clamp, 200A, 40 Hz To 10 kHz

  • Techni-Tool Part #: 374AC465
  • Mfg Part #: I200
  • Sold per: EACH
  • Estimated weight: .915 lb
  • noinfofound
  • noinfofound

Enter Amount $
  • Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters.

    The i200 is a single range 200A AC current clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

    Features:
    Companion to a DMM to measure up to 200 A AC
    1mA per Amp output garantuees easy reading on you meter
    Take accurate current readings without breaking the circuit
    Max. conductor diameter: 20 mm
    CAT III 600V safety rating
    Frequency Response: 40 Hz. to 40 Hz. 10MV/A, 100MV/A
    Maximum Conductor Diagonal: 0.8"

    Specifications

    Nominal current range: 200 A
    Continuous current range: 0.5 A - 200 A
    Maximum Non-Destructive Current: 240 A
    Lowest measurable current: 0.5 A
    Basic accuracy: 1% + 0.5 A (48-65 Hz) (% reading + floorspec)
    Useable frequency: 40 Hz - 10 kHz
    Output level(s): 1 mA/A

    Safety Specifications

    Safety: CAT III, 600 V
    Maximum voltage: 600 V AC

    Mechanical & General Specifications

    Warranty: 1 year
    Maximum conductor diameter: 20 mm
    Maximum conductor size (busbar): 20 x 5 mm
    Output cable length: 1.5 m
    Shrouded banana plugs: Yes

    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GLOVE MATERIAL:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Specifications:

    Nominal current range: 200 A
    Continuous current range: 0.5 A - 200 A
    Maximum Non-Destructive Current: 240 A
    Lowest measurable current: 0.5 A
    Basic accuracy: 1% + 0.5 A (48-65 Hz) (% reading + floorspec)
    Useable frequency: 40 Hz - 10 kHz
    Output level(s): 1 mA/A

    Safety Specifications:

    Safety: CAT III, 600 V
    Maximum voltage: 600 V AC

    Mechanical & General Specifications:

    Warranty: 1 year
    Maximum conductor diameter: 20 mm
    Maximum conductor size (busbar): 20 x 5 mm
    Output cable length: 1.5 m
    Shrouded banana plugs: Yes.
  • noinfofound