Circuit Technology Center Inc. Circuit Technology Center Inc.

Circuit Medic Circuit Frame Contacts, .070/.080,

  • Techni-Tool Part #: 246SO008
  • Mfg Part #: CC070080AG
  • Sold per: EACH
  • Estimated weight: .01 lb
  • noinfofound
  • noinfofound

Enter Amount $
  • Imagine replacing damaged circuits without the mess of liquid epoxy, with a bond strength equal to the original, on bare or loaded PC boards -- All in about 30 seconds. Replacement circuit frames with dry-film epoxy backing make this delicate, precise procedure quick and neat. Trim out the circuit you need and bond it to PC board surface frame or let us design and fabricate a custom size. Specs: Overall sizes: 2.25" x 1.50"; Base material: rolled annealed copper foil, .0014: thick; Adhesive backing: thermostat phenolic butral film, .0018" thick; Bonding temp: 475 degrees F +/-25 degrees F; Bonding time: 30 seconds; Peeling strength: minimum 8 lbs,/inch after cure to FR-4 laminate. Plating options: (T) tin lead: .001" 60/40 tin/lead min.; (G) nickel/gold: .000050" gold over .000100" nickel min.; (U) unplated: No plating. Standard plating is noted on the lower corner of each circuit frame. Non-Stocking Item. May Require Additional Time To Ship.
    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW:
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH:
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GLOVE MATERIAL:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT:
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE:
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH:
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • noinfofound
  • noinfofound