SCS SCS

SCS Air Ionizer Overhead 991 w/3 Fans Self-Balanced

  • Techni-Tool Part #: 105ST991
  • Mfg Part #: 991A
  • Sold per: EACH
  • Estimated weight: 14 lb
  • noinfofound
  • noinfofound

Enter Amount $
  • Using steady state DC ion emission, the SCS Overhead Air Ionizer 991 provides consistent static control coverage. With its overhead mounting system, the ionizer doesn't compromise valuable space on the workbench, allowing for neutralization of static charges. The steady-state DC ion emission enables fast discharge with low airflow, providing a more comfortable work environment for operators. Emitter points are placed behind the fan to eliminate field-induced charge and to ensure a homogeneous mixture of ionized air. Also featured are open-cell foam filters on the fan intakes, protecting the internal components from environmental contamination.

    Features and Benefits
    •  Alarm relay closure circuitry
    •  Bi-color LED indicator
    •  44 inches with three fans
    •  High and low speeds
    •  Self balanced; no calibration needed
    •  Visual performance indicator: green for normal operation and red signals an operational failure alarm
    •  Broad static neutralization over the workbench
    •  Reduces manual emitter point cleanings

    Auto-Clean System
    The Auto-Clean System features a brush mechanism that sweeps the emitter points when the ionizer is turned off and on, allowing the ionizer to always perform at optimum ion output and balance. During operation of the fan, the brush automatically retracts to prevent emitter point wear. The Auto-Clean System brush will extend as the fan slows to a stop. SCS recommends activating the Auto-Clean System at least once a week. Cleaning schedules will vary depending on environmental conditions and application requirements. This automated feature results in reduced operation costs due to lower maintenance.

    Specifications
    •  Ion Emission: Steady state (DC)
    •  Emitter Points: 0.12 in. (3.048 mm) tungsten wire, internally shielded, 2 year life estimated
    •  Air Flow: 14 CFM (per fan, high speed, free-air)
    •  Audible Noise: 63 dB, high fan speed; 57 dB, low fan speed
    •  Power Inlet: IEC60320 (with removable line cord)
    •  Input Voltage: 100-230 VAC, 50/60 Hz, 27 watts max.
    •  Input Current: 0.4A max.
    •  Power: 27W max.
    •  Discharge Time: <8 seconds directly under each fan at 18 in. (46 cm) distance, high fan speed
    •  Offset Voltage Balance: <±20 volts directly under each fan at 18 in. (46 cm) distance; high fan speed
    •  Power Outlet: IEC60320 female, unfused, 5A maximum load
    •  Alarm Relay Closure: Modular handset jack, rated 1A maximum, 30 volts
    •  Coverage Area: 2 ft. x 4 ft. (61 cm x 122 cm) directly under ionizer
    •  Controls: Power/fan speed slide switch: high/off/low settings
    •  Indicators: Bi-color LED: green power ON; red power supply failure
    •  Daisy-Chain Capacity: 10 units maximum
    •  Chassis: Aluminum with epoxy-polyester powder coated
    •  Mounting: Four eyebolts and 1 1/8 in. S-hooks provided
    •  Dimensions: 44 in. L x 6 in. W x 4 in. H (111.7 cm L x 15.2 cm W x 10.1 cm H)

    Operating Environment
    •  Temperature: 50°-95°F (10°-35°C)
    •  Humidity: 20-55% RH (non-condensing)
    •  Ozone Level: <0.010 ppm
    •  RoHS Compliant: Yes
    •  Weight: 10 lb (4.5 kg)
    •  Certifications: cULus, TUV-GS, CE, C-Tick
    •  Warranty: One-year limited


    # OF BITS:
    # OF OUTLETS:
    # OF PIECES:
    # OF POCKETS:
    ACCURACY:
    ADAPTERS/TOOLS:
    AIR FLOW: 150 - 300 CFM
    AMBIDEXTROUS/PAIRS:
    AMPS:
    ANALOG:
    ANEMOMETER:
    ANTI-BACTERIAL:
    ARM LENGTH:
    ATTENUATOR:
    ATTENUATOR/LOAD ACCESSORIES:
    AUTORANGING:
    BALL TIP:
    BANDWIDTH:
    BASE MATERIAL:
    BASE STYLE:
    BATTERY TYPE:
    BATTERY VOLTAGE:
    BENCH LCR:
    BENCH TOP TEST KITS:
    BIT LENGTH:
    BIT STYLE:
    BLADE MATERIAL:
    BLADE STYLE:
    BLADE TYPE:
    BOTTLE MATERIAL:
    BRISTLE LENGTH/TRIM:
    BRISTLE TYPE:
    CABLE LENGTH:
    CABLE MAPPER:
    CABLE TESTER:
    CAN SHIP AIR:
    CAPACITY:
    CASE COLOR:
    CASE TYPE:
    CHEMISTRY:
    CLEANROOM SAFE:
    CLIP CONNECTOR TYPE A:
    CLIP CONNECTOR TYPE B:
    CLOSURE TYPE:
    CLUTCH TYPE:
    COAX/TWISTED PAIR:
    COLLAR TYPE:
    COLOR:
    CONNECTIVITY:
    CONTAINER SIZE:
    CORD LENGTH:
    CORDED/CORDLESS:
    CUFF LENGTH:
    CURRENT RATING:
    CUT:
    CUT LENGTH:
    CUTTING CAPACITY:
    DC SUPPLY TYPE:
    DEEP WELL:
    DEPTH: 6 in
    DIGITAL STORAGE:
    DIGITAL THERMOMETER:
    DIOPTER:
    DISPENSER TYPE:
    DISPOSABLE/WASHABLE:
    DIVIDERS AVAILABLE:
    DRIVE:
    DRIVE SIZE:
    DRY/PRE-WET:
    ERGONOMIC HANDLE:
    ESD CUFFS:
    ESD FABRIC:
    ESD SAFE:
    ESD SAFE HANDLE:
    FABRIC WEIGHT:
    FASTENER SIZE:
    FIBER INSPECTION:
    FIBER SYSTEM TESTER:
    FIXED/ADJUSTABLE:
    FIXTURE CURE SPEED:
    FLAMMABLE:
    FLUORESCENT/LED:
    FOAM FILLED:
    FOOTRING:
    FORMULA:
    FULL CURE SPEED:
    GAP FILL:
    GAUGE:
    GLOVE MATERIAL:
    GRADUATION:
    GROUNDING SNAP:
    HANDHELD LCR:
    HANDLE MATERIAL:
    HANDLE MATERIAL TYPE:
    HANDLE TYPE:
    HEAD SIZE:
    HEAD STYLE:
    HEIGHT: 4 in
    HEIGHT ADJUST RANGE:
    HEIGHT ADJUSTABLE:
    HIGH RESOLUTION:
    INHERENT BALANCE: 0 +/- 5v
    INPUT VAC:
    INSERT/POWER:
    INSIDE DIMENSIONS:
    INSULATOR COLOR:
    JAW OPENING:
    JAW SIZE:
    JAW TYPE:
    KNIFE STYLE:
    L-WRENCH:
    LAMINATE COLOR:
    LAMINATE TYPE:
    LCR ACCESSORIES:
    LEAD LENGTH:
    LENGTH: 44 in
    LENSES & ACCESSORIES:
    LIGHT SOURCE:
    LIGHTING OPTION:
    LOW RESOLUTION:
    MAGNIFICATION:
    MANUAL/AUTO:
    MATERIAL:
    MATERIAL TYPE:
    MAX OUTPUT CURRENT:
    MAX OUTPUT POWER:
    MAX OUTPUT VOLTAGE:
    MAX OUTPUT VOLTAGE 1:
    MAX OUTPUT VOLTAGE 2:
    MAX OUTPUT VOLTAGE 3:
    MAX TORQUE:
    MAX WORKING DISTANCE:
    MELT TEMP:
    METRIC/SAE:
    MILITARY STYLE LATCHES:
    MIXED DOMAIN:
    MIXED SIGNAL:
    MOUNTING OPTION:
    MULTI PIECE SET:
    MULTI SPEED:
    MULTIMETER PRODUCT TYPE:
    NIST TRACEABLE CALIBRATION:
    NO LOAD RPM:
    NUMBER OF ANALOG CHANNELS:
    NUMBER OF DIGITAL CHANNELS:
    NUMBER OF DIGITS:
    NUMBER OF OUTPUTS:
    NUMBER OF TOOLS:
    OAL:
    OPEN END OR COMBO:
    OPTICAL MAGNIFICATION:
    OPTICAL POWER METER:
    OTDR:
    OUTPUT VDC:
    OUTPUT/LUMENS:
    OUTSIDE DIMENSIONS:
    OUTSIDE HEIGHT:
    OUTSIDE LENGTH:
    OUTSIDE WIDTH:
    OVER ALL LENGTH:
    OVERHEAD CABINET:
    PAINT COLOR - FRAME:
    PC BOARD TESTER:
    PLUG TYPE:
    PLUG-IN ELEMENTS:
    POINT SIZE:
    POWER METER ACCESSORIES:
    POWER METERS:
    POWER METHOD:
    POWER SENSORS:
    PRECISION/ECONOMY:
    PROBE PRODUCT TYPE:
    PROBE TYPE:
    PROGRAMMABLE:
    QTY PER PACK:
    RANGE:
    RATING:
    RE-USEABLE:
    RECHARGEABLE:
    REPLACEABLE BLADES:
    REQUIRED BATTERY QTY:
    REQUIRED BATTERY SIZE:
    RF ADAPTER:
    RF CABLE:
    RF CABLE ACCESSORIES:
    RF TRAINING:
    RIGHT ANGLE DMM CONNECTOR:
    ROLL LENGTH:
    RPM:
    SAFE FOR PLASTIC:
    SEWN IN PALLETS:
    SHAFT LENGTH:
    SHAFT MATERIAL:
    SHAFT SIZE:
    SHANK SIZE:
    SHAPE:
    SINGLE/DOUBLE/TRIPLE:
    SINGLE/DUAL OPERATION:
    SIZE:
    SPECTRUM ANALYZER ACCESSORIES:
    SPEED:
    STAND ALONE:
    STANDARD RESOLUTION:
    START METHOD:
    STATIC SHIELDING:
    STRENGTH:
    SUBSTRATE (MATERIAL):
    SURFACE RESISTANCE:
    SUSPENDED DRAWER:
    T-HANDLE:
    TABLE & MAT/FLOOR:
    TAPE LENGTH:
    TAPE MATERIAL:
    TAPE PROFILE:
    TAPE SIZE:
    TDR:
    TEMPERATURE PROBE:
    TEMPERATURE RANGE:
    TENSILE STRENGTH:
    TERMINATION (OR LOAD):
    TEST CONNECTOR TYPE:
    TEST CONNECTOR TYPE A:
    TEST CONNECTOR TYPE B:
    THERMOCOUPLE:
    THICKNESS:
    TILT CONTROL:
    TIP DIM (A):
    TIP LENGTH:
    TIP MATERIAL:
    TIP SIZE:
    TIP STYLE:
    TIP STYLE/TYPE:
    TIP WIDTH:
    TONER:
    TORQUE RANGE:
    TOUCHSCREEN:
    TRUE RMS:
    TYPE/SIZE:
    UNWRAP:
    VIDEO MAGNIFICATION:
    VISUAL FAULT LOCATOR:
    VISUAL LIGHT SOUCE:
    VOLTAGE:
    VOLTAGE RATING:
    WEIGHT CAPACITY:
    WHEELED:
    WIDTH:
    WIDTH ("):
    WINDER CASE:
    WIRE GAUGE:
    WITH PALLETS:
    WRAP:
    ZERO RESIDUE:
    ZOOM RANGE:
  • Specifications:

    •  Ion Emission: Steady state (DC)
    •  Emitter Points: 0.12 in. (3.048 mm) tungsten wire, internally shielded, 2 year life estimated
    •  Air Flow: 14 CFM (per fan, high speed, free-air)
    •  Audible Noise: 63 dB, high fan speed; 57 dB, low fan speed
    •  Power Inlet: IEC60320 (with removable line cord)
    •  Input Voltage: 100-230 VAC, 50/60 Hz, 27 watts max.
    •  Input Current: 0.4A max.
    •  Power: 27W max.
    •  Discharge Time: <8 seconds directly under each fan at 18 in. (46 cm) distance, high fan speed
    •  Offset Voltage Balance: <±20 volts directly under each fan at 18 in. (46 cm) distance; high fan speed
    •  Power Outlet: IEC60320 female, unfused, 5A maximum load
    •  Alarm Relay Closure: Modular handset jack, rated 1A maximum, 30 volts
    •  Coverage Area: 2 ft. x 4 ft. (61 cm x 122 cm) directly under ionizer
    •  Controls: Power/fan speed slide switch: high/off/low settings
    •  Indicators: Bi-color LED: green power ON; red power supply failure
    •  Daisy-Chain Capacity: 10 units maximum
    •  Chassis: Aluminum with epoxy-polyester powder coated
    •  Mounting: Four eyebolts and 1 1/8 in. S-hooks provided
    •  Dimensions: 44 in. L x 6 in. W x 4 in. H (111.7 cm L x 15.2 cm W x 10.1 cm H)
    Operating Environment
    •  Temperature: 50°-95°F (10°-35°C)
    •  Humidity: 20-55% RH (non-condensing)
    •  Ozone Level: <0.010 ppm
    •  RoHS Compliant: Yes
    •  Weight: 10 lb (4.5 kg)
    •  Certifications: cULus, TUV-GS, CE, C-Tick
    •  Warranty: One-year limited.
  • noinfofound